Product Manual

98 | SAMLEX AMERICA INC. SAMLEX AMERICA INC. | 99
!
ATTENTION!
Lorsque « Switch Type » de ON/OFF contrôle décrit ci-dessus est sélectionnée, le bouton ON/OFF sur le panneau
avant de l’unité (12, Fig 2.1) ne devraient pas servir à allumer ou éteindre l’appareil. La façade, bouton poussoir
ON/OFF suivra désormais la logique de contrôle ci-dessus « Switch Type » dans lequel l’appareil demeurera allumé
aussi longtemps que la touche est maintenue enfoncée et s’éteint après 2 secondes après que qu’il est libéré.
6.3 OPERATIONAL INFORMATION THROUGH LEDS AND BUZZER
Table 6.1 shows the operational states of the unit indicated by the following LEDs on the
front panel of the unit and Buzzer:
o
Blue LED marked “ON” (12, Fig 2.1)
o Red LED marked “Fault” (13, Fig 2.1)
Optional Remote Control Model EVO-RC-PLUS will be required for more detailed messag-
ing that is available through its LCD display and LEDs. This remote will also be required for
programming of various parameters to suit specic requirements.
TABLE 6.1 LED AND BUZZER INDICATIONS
Status
Blue LED
marked “ON”
(12, Fig 2.1)
Red LED
marked “Fault”
(13, Fig 2.1) Buzzer
Seen during Power-On
Sequence
Indicates completion of
Power-On Sequence after
Power ON/OFF Button is
pressed for 2 sec
Flash 3 times Off Off
Seen during Power-Off
Sequence
Indicates completion of
Power-Off Sequence after
Power ON/OFF Button is
pressed for 5 sec
On On Off
Normal charging Flash 1 time per sec Off Off
Equalization charging Flash 2 times per
sec
Off Off
Inverting (Discharging) On Off Beep per 3 second
(Default Off)
Low battery alarm On Flash 1 per sec Beep per 1 second
Power saving Flash 1 time per
3 sec
Off Off
Standby (See CAUTION!
at Section 6.7)
Off Off Off
Fault Off On On
SECTION 6 | Operation, Protections and Troubleshooting