Manual
30 | SAMLEX AMERICA INC.
Mounting Orientation
in such a manner so that small objects should not be able to fall easily into the unit from
-
tion should be such that if the internal components overheat and melt / dislodge due to
of the unit on to a combustible material and cause a re hazard. The size of openings
has been limited as per the safety requirements to prevent the above possibilities when
the unit is mounted in the recommended orientations. In order to meet the regulatory
- Mount on a non-combustible material.
- The mounting surface should be able to support the weight of the unit
- Mount horizontally on a horizontal surface - above a horizontal surface
- Mount horizontally on a vertical surface – The unit can be mounted on a vertical
left or right.
WARNING!
the unit through the fan grille when the fan opening faces up. If fan opening
DC Side Connections
Preventing DC Input Over Voltage
-
nent damage to the unit. Please observe the following precautions:
-
and the battery.
SECTION 8 | Installation