Manual
34 | SAMLEX AMERICA INC.
i
INFO
cover installation requirements of 600 to 3500W inverters. Voltage drop of 2%
DC Input Terminals for Battery Connection
follows: Model PST-60S has an 8 mm cylindrical hole diameter with M-8 set screw and
Models PST-100S-150S and 200S have an 11 mm cylindrical hole diameter with M-8 set screw.
Using Proper DC Wiring Termination
-
nals that will ensure a rm and tight connection. The following Pin Type of terminals are
- PST-60S :
2
wires
2
wires
Reducing RF Interference
Taping Battery Cables Together to Reduce Inductance
-
tery cables helps to reduce induced voltages. This reduces ripple in the battery cables
and improves performance and efciency.
AC SIDE CONNECTIONS
WARNING! Preventing Paralleling of the AC Output
-
SECTION 8 | Installation