Manual

36 | SAMLEX AMERICA INC. SAMLEX AMERICA INC. | 37
SECTION 9 | Operation
Powering On The Loads



prematurely trigger the overload protection.


inverter is not overloaded by the higher starting surge if all the loads are switched on at
once.
Switching The Inverter ON/OFF



the high power circuitry.
!
CAUTION!
Please note that the  switch is not switching the high power battery

is in the OFF
on any circuits connected to the inverter.




-
tion of the load.
Temperature Controlled Cooling Fan
The cooling fan is thermostatically controlled. Temperature of a critical hot spot inside
the inverter is monitored to activate the fan and the over temperature shut-down.
. The fan
will be automatically switched OFF
that the fan may not come on at low loads or if the ambient temperature is cooler. This
is normal.