Owner`s manual

20 | SAMLEX AMERICA INC. SAMLEX AMERICA INC. | 21
SECTION 5 | Operation
7. Under normal operation, the load(s) will be powered from the inverter. Refer to
Troubleshooting Guide in case abnormal operation is observed.
Operation as Stand-alone Inverter - Switching OFF
1. Switch OFF the load(s)
2. Switch OFF the Inverter
Operation as Stand-alone Charger - Switching ON
1. SwitchOFFtheInverterON/OFFSwitch(3,Fig3.1).Asonlybatterychargingisrequired,
the inverter should be OFF.
2. Plug the NEMA5-15P plug of the AC Input Cord (10B, Fig 3.1) into 120 VAC, 15A/ 20A GFCI
protected AC outlet.
3. Switch ON the Battery Charger. Green LED “Charger” (7, Fig 3.1) will be lighted. The
battery will start getting charged as described under “2 Stage Charging” in
Section 2, page 7.
Operation as Stand-alone Battery Charger - Switching OFF
1. Switch OFF the Charger
2. Remove AC input Power Cord