User Manual

iv
ESD Precautions
Integrated circuits on computer boards are sensitive to static electricity. To avoid damaging chips from electrostatic
discharge, observe the following precautions:
 Do not remove boards or integrated circuits from their anti-static packaging until you are ready to install them.
 Before handling a board or integrated circuit, touch an unpainted portion of the system unit chassis for a few seconds. This
helps to discharge any static electricity on your body.
 Wear a wrist-grounding strap, available from most electronic component stores, when handling boards and components.
Trademarks Acknowledgments
SAMMI INFORMATION SYSTEMS is a trademark of SAMMI INFORMATION SYSTEMS CO.,LTD.
MS-DOS, and Windows ’95 are trademarks of Microsoft Corporation.
AMD is a trademark of Advanced Micro Devices, Inc.
AWARD is a trademark of Award Software. Inc.
Cyrix is a trademark of Cyrix Corporation.
IBM, PC/AT, PS/2, VGA are trademarks of International Business Machines Corporation.
Intel and Pentium are trademarks of Intel Corporation.
Winbond is a trademark of Winbond Electronics Corp.
C&T is a trademark of Chips and Technologies, Inc.
SST is a trademark of Silicon Storage Technology, Inc.
Realtek is a trademark of Realtek Semiconductor Corporation.
Other brand names and trademarks are the properties and
registered brands of their respective owners.