User Manual

MiniStation All-in-One Petit Board User’s Manual
Award BIOS Setup
60
z IRQ3 -7, 9-15, NMI The default value is “Disabled”.
Primary IDE 0 The default value is “Disabled”.
Primary IDE 1 The default value is “Disabled”.
Secondary IDE 0 The default value is “Disabled”.
Secondary IDE 1 The default value is “Disabled”.
Floppy Disk The default value is “Disabled”.
Serial Port The default value is “Enabled”.
Parallel Port The default value is “Disabled”.
5.9 PnP/PCI Configuration Setup
This section describes configuring the PCI bus system. PCI, or Personal Computer Interconnect, is a
system which allows I/O devices to operate at speeds nearing the speed the CPU itself uses when
communicating with its own special components. This section covers some very technical items and it is
strongly recommended that only experienced users should make any changes to the default settings.
ROM PCI/ISA BIOS (2A69KA5C)
PNP/PCI CONFIGURATION SETUP
AWARD SOFTWARE, INC.
PNP OS Installed : No
A
ssign IRQ For VGA : Enabled
Resources Controlled By : Manual
Reset Configuration Data : Enabled Used MEM base addr : N/A
IRQ-3 assigned to : Legacy ISA
A
ssign IRQ For USB : Enabled
IRQ-4 assigned to : Legacy ISA
IRQ-5 assigned to : PCI/ISA PnP Onboard LAN BootROM : Disabled
IRQ-7 assigned to : Legacy ISA
IRQ-9 assigned to : PCI/ISA PnP
IRQ-10 assigned to : Legacy ISA
IRQ-11 assigned to : Legacy ISA
IRQ-12 assigned to : PCI/ISA PnP
IRQ-14 assigned to : PCI/ISA PnP
IRQ-15 assigned to : PCI/ISA PnP
DMA-0 assigned to : PCI/ISA PnP
DMA-1 assigned to : PCI/ISA PnP ESC: Quit ↑↓→←: Select Item
DMA-3 assigned to : PCI/ISA PnP F1 : Help PU / PD / + / - : Modify
DMA-5 assigned to : PCI/ISA PnP F5 : Old Values (Shift)F2 : Color
DMA-6 assigned to : PCI/ISA PnP F6 : Load BIOS Defaults
DMA-7 assigned to : PCI/ISA PnP F7 : Load Setup Defaults