User Manual

MiniStation All-in-One Petit Board User’s Manual
Hardware Description
19
4.7 IDE Interface Connector
The built-in 1 channel PCI bus enhanced IDE controller supports 2 IDE drives, master/slave mode and post
write transaction mechanisms with 64-byte buffer, and master data transaction. CN3 is a 44-pin primary
IDE interface connector for standard 2.5” IDE device.
CN3: IDE Connector Pin Assignment
Pin Description Pin Description Pin Description
1
Reset #
2
GND
3
Data 7
4
Data 8
5
Data 6
6
Data 9
7
Data 5
8
Data 10
9
Data 4
10
Data 11
11
Data 3
12
Data 12
13
Data 2
14
Data 13
15
Data 1
16
Data 14
17
Data 0
18
Data 15
19
GND
20
NC
21
NC
22
GND
23
IOW #
24
GND
25
IOR #
26
GND
27
IOCHRDY
28
NC
29
NC
30
GND-Default
31
Interrupt
32
NC
33
SA1
34
NC
35
SA0
36
SA2
37
HDC CS0 #
38
HDC CSI #
39
HDD Active #
40
GND
41
Vcc
42
Vcc
43
GND
44
NC
4.8 Display Interface
4.8.1 Flat Panel/CRT Interface Controller
The built-in VIA S3 is a high-performance flat panel/super VGA display controller with onboard 4M bytes
VGA RAM. It can also support CRT at a maximum resolution of up to 1280x1024 with 64K colors. The
Lynx3DM supports color dual scan STN and TFT panel interface. For color TFT panel, Lynx3DM can
support single pixel per clock of 9-bit, 12-bit, 18-bit, 24-bit, or double-pixel per clock of 24-bit, 36-bit, 48-bit
interface up to 1280x1024 resolution. Lynx3DM can support two separate TFT LCDs.
4.8.2 Features
z Fully compatible with IBM
TM
VGA
z Flat panel and CRT monitor can be displayed simultaneously
z Onboard 4M bytes VGA RAM
z Supports panel resolution up to 1280x1024
z Supports non-interlaced CRT monitors with resolutions up to 1280x1024 64K colors
z Dual View support under Microsoft Windows 95, Windows NT, and Windows 98 ,Windows 2000
z SMARTMAP intelligent color to gray scale conversion enhances text legibility
z Integrated programmable linear address feature accelerates GUI performance
z Built-in 144 pins so-dimm connector for flat panel display.