User's Manual

SM-R400 User’s Manual

Company Date Version

V2.4.16

Identification with Radio and Optical

You can connect with bluetooth reader in following method.

1. If you select [Search] in [Option menu],

then the window to select bluetooth device appears.

Already paired devices are appeared on upper part.

Because you must search new device therefore click [Scan for devices]

Select the device name “Blue Angel” among searched devices at the lower part.

2. Only when you connect first time,

Pairing process is progressed – PIN number is “0000”.

In most cases, it is connected normally after pairing.

3. Sometimes, it is not connected after pairing,

[Option menu]→[Search]→Select “Blue angel” in paired devices.

If you click [Inventory] button then it starts to read tag (Inventory).

If tag is recognized

Tag ID is displayed in list box → you can find the latest one on first top.

If you click [StopOperation] button then it stops to read tag (Inventory).

=============================================================================

FCC Information to User

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is con-

nected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution

Modifications not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may cause undesired

operation

IMPORTANT NOTE:

FCC RF Radiation Exposure Statement:

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with a minimum distance of 20

centimeters between the radiator and your body.This transmitter must not be co-located or operating

in conjunction with any other antenna or transmitter.