Industrial PC [ User’s guide ] SAMMI Information Systems Co., Ltd. Version 1.
1 Leader in RF Technology Disclaimer The information in this document is subject to change without notice. The manufacturer makes no representations or warranties regarding the contents of this manual and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose.
2 Leader in RF Technology Head Quarters Sammi information Systems Co., Ltd. Corporate Headquarters Address : 11F Kolon Digital Tower Aston Bldg, Gasan Digital 1Ro 212 Geumcheon-gu, Seoul, 153-708, Korea Telephone : 82-2-790-5505 Fax : 82-2-790-5509 Email: sales@sammicomputer.co.kr Web: www.sammicomputer.co.kr US Office Smarterminal Computers, Inc. US Subsidiary of Sammi information Systems co.
3 Leader in RF Technology Limited Warranty SmarTerminal warrants its products to be free from defects in materials and workmanship and to conform to SmarTerminal published specifications applicable to the products purchased at the time of shipment.
4 Leader in RF Technology Important safety information Before you use the TiTan T8 (referred to as the TiTAN T8), read these safety instructions and the operation instructions in this handbook. Failure to observe all these instructions voids the Limited Warranty and may lead to suspension or denial of services to the offender, or legal action, or both.
5 Leader in RF Technology WARNING Do not use any dock or any other accessory or attachment that is not manufactured or supplied by SmarTerminal or an authorized SmarTerminal accessories supplier. Use of any accessory or attachment that is not supplied or approved for use with the TiTAN T8 by SmarTerminal is not permitted because it may cause hazards.
6 Leader in RF Technology Welcome ........................................................................................................................................ 8 About this Manual ........................................................................................................................ 9 Ordering Information .................................................................................................................... 9 System Specifications ..................................
7 Leader in RF Technology 6 Trouble shooting guide .......................................................................................................... 45 Troubleshooting for Wireless............................................................................................ 46 Troubleshooting for battery ............................................................................................... 46 Troubleshooting for Bluetooth problem ............................................................
8 Leader in RF Technology Welcome Congratulations on selecting the TiTan T8, supported by Microsoft Windows®, XP, Vista, 7. This unique TiTAN T8 offers a special combination of features that make it an ideal partner for a wide range of applications.
9 Leader in RF Technology About this Manual This User’s Manual is intended for experienced users and integrators with hardware knowledge of personal computers. If you are not sure about any description in this User’s Manual, please consult your vendor before further handling. The following chapters contained in this manual are: Chapter 1: Getting Started - Basic functions of the TiTAN T8. Chapter 2: Starting Titan Utility - Using the system management software included with the TiTAN T8.
10 Leader in RF Technology System Specifications The TiTan T8 meets the following specifications. Unless otherwise noted, all the specifications listed below are subject to change without prior notification.
11 Leader in RF Technology 1 Getting Started Chapter 1 Getting Started SmarTerminal® |Fully rugged TiTAN T8 11
12 Leader in RF Technology 1.1 Getting started This chapter gives you an overview of your TiTAN T8 and includes a quick-start guide to TiTAN T8 keys. Industrial PC(TiTAN T8) use to be mounted in vehicle or production factory line etc. docking station Mounting TiTAN T8 on docking station follow the steps given below. Mount TiTan T8 on mounting unit so that the bottom notch fits in the Pin holder of the mounting unit so as it will look like in the figure below.
13 Leader in RF Technology Speaker Battery LED indicator 1.3Mega Pixel Camera Power & Reset button Key pad MIC 8.
14 Leader in RF Technology LED Indicator Icon Light Red Flashing Red Blue Description Power is on System is in standby mode WLAN is enabled No light Green WLAN is not powered TiTAN is reading from or writing to the built in SSD or HDD No light Red HDD is idle Battery is charging Green Battery is fully charged Power & Reset Button When clicking power button (when you turn on), the button stays with red light.
15 Leader in RF Technology Numeric Key Button 1) When ‘Fn’ is enabled: simply works as number button 2) When ‘Fn’ is disabled: use as Key Map definition function. (to help memorize functions, the drawings under the numbers are actually related each function.
16 Leader in RF Technology Key Pad Lock / Unlock The main purpose of placing a keypad lock[Fn+3] to a TiTAN T8 is to prevent accidental key input. You can unlock the keypad via TiTan Utility.
17 Leader in RF Technology 1.2.2 Rear view 3Mega Pixel Camera Mounted holder Hot Swappable Battery Camera The 3MP Color Camera is located on the back panel of the computer. The camera can be used for picture capture as well as streaming video. Hot-Swappable Battery Refresh your power supply without shutting down.
18 Leader in RF Technology 1.2.
19 Leader in RF Technology 1.2.4 Bottom view VGA Port DIO Connector (Option) RS-232 Port (Default) Docking Connector VGA D-Sub 15 pin VGA connector for display output Docking connector When seated in a TiTan T8 peripheral, the terminal is powered, the batteries charged, and communication occurs via this connector.
20 Leader in RF Technology 2 Quick Start Chapter 2 Quick Start SmarTerminal® |Fully rugged TiTAN T8 20
21 Leader in RF Technology 2.1 Turning On the TiTan T8 for the First Time Use the following instructions the first time an TiTan T8 is turned on. After which you will only need to press the power button on the keypad as TiTan T8 should be fully charged and ready to go. To turn on the TiTan T8 1. Connect the AC adapter power cord to the AC adapter. 2. Connect the AC adapter power cord to an AC outlet. 3. Connect the AC adapter to the DC power port on the left side of your TiTan T8. 4.
22 Leader in RF Technology Chapter 3 Using a titan utility 3 Using a titan utility SmarTerminal® |Fully rugged TiTAN T8 22
23 Leader in RF Technology This Chapter will give you how to use menu function including basic hardware function adjustment and the Titan Utility software that is very easy & helpful for operating the computer. As TiTAN T8 start, Titan Utility will then automatically run (start) through forwarding process. As illustrated below, on the bottom right side of Tray Icon, you can see the Titan Utility icon minimized indicated as a red square.
24 Leader in RF Technology If ‘Fn’ button is not active (or not pressed down, not touched), then gray color as below. Device Control You can also utilize each device respectively by using Titan Utility to toggle it as ‘Enable / Disable’ WIFI Enable/Disable When clicking Wifi button from the Titan Utility, you can enable / disable of Titan T8. When disabling the Device, you can’t access (connect) to WiFi.
25 Leader in RF Technology 2) When WiFi is disabled: You won’t be able to see nor check Wireless LAN Device from the Device Manager. Even if you go to Network -> Property -> adapter, you still won’t be able to see nor check it. Bluetooth Enable/Disable When clicking Bluetooth button at the Titan Utility, you can also enable / disable Bluetooth Device of Titan T8. When disabling Device, it’s impossible to access to Bluetooth.
26 Leader in RF Technology 1) When Bluetooth is enabled: You can check Bluetooth Device from Device Manager. 2) When WiFi is disabled: WiFi Device is disabled as well. From the Device Manager, you will see Bluetooth Device has disappeared as shown below. Mobile Enable/Disable When clicking ‘Mobile’ button from the Titan Utility, you can enable / disable of CDMA Device or GPRS/GSM of Titan T8.
27 Leader in RF Technology When disabling Mobile Device, it’s impossible to connect or access through 2G. 1) For CDMA model, when ‘Mobile’ button is enabled: CDMA 2G As shown below, U600 EVDO Modem (for phone connection), U600 EVDO Network Adapter (for WWAN), 3 serial ports (for GPS data base, serial connection etc.), when they are shown in the Device Manager as red squares, it means CDMA model is enabled (working normally).
28 Leader in RF Technology GPS Enable/Disable When clicking ‘GPS’ button in Titan Utility, you can also enable / disable the function of GPS of Titan T8. When disabling the Device, access (or connect) to GPS becomes impossible. *It is important to note that when CDMA is disabled, GPS will also be disabled simultaneously, it’s normally done by mechanism of the computer.
29 Leader in RF Technology CAM-F Enable/Disable When clicking ‘CAM-F’ button from Titan Utility, you can enable / disable the Device of frontal cam of Titan T8. When disabling the Device, you can’t use the cam at all, the ‘USB Video Device’ won’t be shown as illustrated as below to prove.
30 Leader in RF Technology CAM-R Enable/Disable When clicking ‘CAM-R’ button from Titan Utility, you can enable / disable the Device of the rear side of the cam. Once the device becomes disabled, the rear side cam will not work. In order to see if rear cam is working, go to “Titan Camera” application.
31 Leader in RF Technology Application Launch By using the Titan Utility, you can launch the application related to each function. External Display When clicking ‘External Display’ button from Titan Utility, it will information regarding Display, and using this application, you can change the display settings such as video settings as shown below.
32 Leader in RF Technology Display Rotate When clicking ‘Display Rotate’ button, you can also turn the Titan T8 screen with 90 degree angle anti-clock wise. For example, it changes 800x600 to 600x800.. If you click Display Rotate button again, it goes back to 800x600.
33 Leader in RF Technology Internet Explorer WiFi Setup When you click WiFi Setup from Titan Utility, ‘Wireless LAN Driver Configuration Program’ which is installed in Titan T8 will run.
34 Leader in RF Technology Bluetooth Setup When you click Bluetooth Setup button, ‘Bluetooth Driver Setup Program’ will run. * You need to install Bluetooth program (which works similar to BlueSoleil), because the current Titan T8 doesn’t have it installed. *Bluetooth module is already installed in the Titan T8. Seeking Bar (Brightness and sound control) Brightness control Simply use this flower looking button to move left and right. It’s located at the bottom of Titan Utility when it pops up.
35 Leader in RF Technology For extra information, and help ‘Fn’ button on Titan T8 When pressed: When Un-Pressed: Help Button Click on it to open the help menu.
36 Leader in RF Technology Configure Touchscreen In Windows Vista / 7 With PenMount Windows Universal V2.2.0.
37 Leader in RF Technology Chapter 4 Power management 4 Power management SmarTerminal® |Fully rugged TiTAN T8 37
38 Leader in RF Technology 4.1 Checking the Battery Level You can check the remaining battery power in the Windows® battery status indicator located at the lower right-hand corner of the task tray. The Battery status icon only appears in the task tray while the unit is running on the battery power. Battery Power Indicator 4.2 Monitoring Battery Power There are four ways to monitor how much power battery has left. 1. Click Start / Settings / Control Panel / Power Options then click Power Meter.
39 Leader in RF Technology Low Battery Alarms How your TiTAN T8 responds to a low battery condition is set under Start / Settings / Control Panel / Power Options / Alarms. Two different power alarms can be enabled or disabled: the Low Battery Alarm, and the Critical Battery Alarm. Warning: When battery power is low, the battery indicator will flash red, and the alarm will display a warning on your screen. Take immediate action, such as saving files or connecting to the AC adapter, or data may be lost.
40 Leader in RF Technology Chapter 5 Calibration 5 Calibration SmarTerminal® |Fully rugged TiTAN T8 40
41 Leader in RF Technology PenMount Control Panel The functions under PenMount Control Panel are: Device In this tab, you can find out how many devices are detected on your system. Select any device by clicking on its icon. Calibrate This function offers two ways to calibrate your touchscreen. ‘Standard Calibration’ adjusts most touchscreens while ‘Advanced Calibration’ adjusts aging touchscreens. Standard Calibration Click this button and arrows appear pointing to red Advanced Calibration squares.
42 Leader in RF Technology 2. Click “Standard Calibration” to start standard NOTE: The older the touchscreen gets, the more Advanced Mode calibration points you need for an accurate calibration. Use a stylus for Advanced Calibration for greater accuracy. Do the following for Advanced Calibration: 2. Back in Calibrate tab, press “Advanced Calibration” button to start Advanced Calibration.
43 Leader in RF Technology NOTE: It is recommended that you use a stylus for Advanced Calibration for greater accuracy. Plot Calibration Data Turn off EEPROM Storage Check this function to have touch panel linearity comparison graph appear when you finish Advanced Calibration.
44 Leader in RF Technology This page is the edge compensation settings for the advanced calibration. You can adjust the settings from 0 to 30 for accommodating the difference of each touch panel.
45 Leader in RF Technology Chapter 6 Trouble shooting guide 6 Trouble shooting guide SmarTerminal® |Fully rugged TiTAN T8 45
46 Leader in RF Technology Troubleshooting for Wireless This chapter provides solutions to problems usually encountered during the installation and operation of the adapter. 1. Symptom: The Wireless adapter is linking, but can’t share files with others. Possible Remedy: Make sure the File and printer-sharing function is enabled. 2. Symptom: Slow or unstable performance. Possible Remedy: Try to change the channel of the communicating group or move your device closer to the communicating device. 3.
47 Leader in RF Technology temperature. Make sure that the battery pack is installed correctly. Make sure that the battery terminals are clean. Troubleshooting for Bluetooth problem Symptom I cannot connect to another device with Bluetooth wireless technology. Possible Remedy: Make sure that both devices have activated Bluetooth feature. Make sure that the distance between the two devices are not over 10 meters or that there are no walls or other obstructions between the devices.
48 Leader in RF Technology The external audio device does not work. Possible Remedy: Make sure that your TiTAN T8 is equipped with the driver needed. Click the speaker symbol on the taskbar and check the Windows volume control. Check the volume control of your TiTAN T8.
49 Leader in RF Technology Chapter 7 Appendix 7 Appendix SmarTerminal® |Fully rugged TiTAN T8 49
50 Leader in RF Technology FCC Compliance Statement This product has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
