DVE-6xx DVD Player USER MANUAL 1
FEATURES match your TV/monitor. For example, when your p Compatible with DVD, VCD, CD, Super VCD, CVD, and MP3 TV/monitor requires a NTSC video and you’re playing This DVD player can play a variety of disc media the PAL disc to play on your display. a PAL disc, this DVD player will automatically convert including: DVD Video, Video CD, CD, Super VCD, p CVD, and MP3 audio recorded on CD-ROM discs.
PACKAGE CONTENTS Please verify that the following items are included within the DVD carton. If items are missing, please promptly return this unit to the retailer for an exchange.
INDEX CD/VCD OSD M ODES .......................................................20 FEATURES ...................................................................................1 BASIC OPERATION ................................................................21 PACKAGE CONTENTS .............................................................2 START P LAYBACK ................................................................21 STOP P LAYBACK ..................................................................
PRECAUTIONS Please read the following carefully to get the best and safest performance from this DVD player p Power Supply p Usage and Storage 1 Make sure to use the correct power outlet as rated on the 1 Do not remove the top cover to avoid possible electric shock from touching the inside of this unit. back of the DVD unit.(AC100 – 240V) 1 Do not place any heavy objects on top of this unit.
DISC CARE p Disc Usage p Disc Cleaning 1 Please hold all discs by their edges or the center 1 Fingerprints or dirt on disc surfaces can weaken the light opening as shown below. Do not touch the shiny surface reflected from the disc and directly influence the signal of the discs. quality. The poorer the signal quality, the poorer the playback performance. Keep the disc clean by wiping it straight out from the center with a dry soft cloth.
DISC COMPATIBILITY CHART This DVD player can play the following types of discs: Disc Type Dimension/Side/Layer Max. Playback Time (Storage Capacity) DVD Video DVD 12 cm/single sided/single layer 12 cm/single sided/double layer 12 cm/double sided/single layer 12 cm/double sided/double layer MPEG2 TYPE 133 min. (4.7 GB) 242 min. (8.5 GB) 266 min. (9.4 GB) 484 min. (17 GB) 8 cm/single sided/single layer 8 cm/single sided/double layer 8 cm/double sided/single layer 8 cm/double sided/double layer 41 min.
FRONT PANEL/DISPLAY WINDOW p Front Panel 1. Headphone Volume Control 10. Adjusts the volume level of the headphone. 2. Plays the inserted disc. Headphone Jack 11. Connects the headphone to the unit. 3. PLAY Button STOP Button Stops playback. LCD Display Window 12. NEXT Button Displays operation information. Goes to the next chapter/track during play with 4. Disc Tray DVD/VCD/CD. However, it works as “Go to the next 5. Disc Tray OPEN/CLOSE Button page” in the PBC menu with VCD discs.
p Display Window ★ As Per Real Model 1. CD/VCD Indicator 9. Multi-Angle Indicator Identifies the inserted disc as audio CD or Video CD. For DVD discs containing multiple view angles, the 2. PBC Indicator for VCD Disc multi-angle indicator will display during playback of a Playback control indicator. scene with multi-angle views. 3. DVD Indicator 10. Dolby Digital AC-3 Audio Indicator Identifies the inserted disc as a DVD disc. Indicates the disc played contains Dolby Digital AC-3 4.
REMOTE CONTROL UNIT To use the remote control unit to operate the DVD player, When the remote control unit does not function insert two R6 batteries (size AA) making sure that the + correctly or its operation range reduces, please replace and – ends of the batteries are matched to the +/- marks both batteries at the same time. i If the remote control unit will be not used for a long time, printed inside the battery compartment.
1. POWER 17. Turns on/off the DVD player unit 2. Engages slow-motion forward/reverse playback. Refer to p.21. SETUP 18. Customizes DVD player settings. Refer to p.13. 3. 19. OPEN/CLOSE 20. SEARCH 21. ANGLE Refer to p.22. 22. 23. AUDIO 24. 25. 26. Digits PBC/MENU Used for direct selection of menu choices, audio tracks, and other inputs such as time and password 27. 28. TITLE RETURN 29. 30. KARAOKE button (Karaoke Model Only) NEXT Refer to p.28. 31.
REAR PANEL AND CONNECTIONS p Video Output Terminals & Connections 1 Y/Cb/Cr Component Video Output Terminals Ê Use component video output with televisions or monitors equipped with component video inputs for best picture quality. Whenever the component video output terminal is used, you must set the DVD player’s VIDEO OUT setting to Y/CB/CR (Refer to p. 14).
p Audio Output Terminals and Connections 1 Stereo Audio Output Terminals (L/R) Ê Use stereo output terminals for connection with your television or other non-Dolby Digital A/V receivers or amplifiers. These terminals provide down-mixed Dolby Digital audio signals for standard 2-channel playback. 1 Dolby AC-3 5.1 Channel Analog Audio Output Terminals Ë (5.1ch Model Only) Use Dolby AC-3 5.1channel analog audio outputs for connection with a Dolby Digital Ready A/V receiver or amplifier with 5.
INITIAL SETTING Press the SETUP button on the remote controller to set up 1 4:3 4:3 pan & scan video output for normal TV set the initial setting.
Audio Output SCART Out (Euro Model Only) You can choose to send the player’s audio signals to an external receiver using the following outputs: 1 Analog: Audio signals are sent using Dolby Digital 5.1 channel audio terminals (5.1ch model Only) and stereo audio terminals. Selecting this choice will disable the digital audio outputs. 1 Digital: Audio signals are sent using the optical output and the coaxial output. Selecting this choice will disable the analog outputs.
Center Speaker Enables/Disables the center channel output. “ON” means “enable output” and “OFF” means “disable output.” -- GENERAL PAGE -TV DISPLAY ANGLE MARK OSD LANGUAGE AUDIO OUTPUT VIDEO OUT SCART OUT CAPTIONS SCREEN SAVER >> -- SPEAKER SETUP PAGE -CNTR SPEAKER >> ON REAR SPEAKER OFF SUBWOOFER CNTR DELAY REAR DELAY ON OFF SCREEN SAVER 3MAIN PAGE p Speaker Setup (2ch Model Only) CENTER SPEAKER ON You can set the analog audio output in PRO-LOGIC or STEREO mode.
Center Delay This unit supports the center time delay range of 0 to 5 ms in 1ms steps. Disc Audio encoding format Digital output format DVD Dolby Digital (AC-3) Bitstream (2~5.
DTS DTS stands for Digital Theater System. DTS is a surround system different from the Dolby Digital (AC-3) system. It is an encoded/decoded process that delivers multi-channels of “master quality” audio on DVD. If you have a DTS encoded disc, set the DTS to “BITSTREAM” (default) to turn this function on for better sound fidelity.
Parental 1 -- PREFERENCES PAGE -AUDIO >> ENGLISH SUBTITLE FRENCH DISC MENU SPANISH PARENTAL CHINESE PASSWORD JAPANESE DEFAULTS GERMAN 1 1 PORTUGUESE 3MAIN PAGE A ”KIDS SAFE” rating level allows DVDs for children to be played, but those for adults / general audiences are prohibited. A ”THEATER” rating level, allows DVDs for children / general audiences to be played, but won’t play DVDs for adults. An ”ADULT” rating level allows all DVDs to be played.
PASSWORD CHANGE PAGE OLD PASSWORD NEW PASSWORD CONFIRM PASSOWRD PLASE ENTER OLD PASSWORD Defaults When you select “RESET”, all the initial settings will be restored to the default setting.
ON-SCREEN DISPLAY (OSD) p DVD OSD modes TITLE 002/04 CHAPTER 02/05 SUBTITLE 01/06:ENGLISH AUDIO 1/4:AC-3 2CH ENGLISH There are 3 OSD display modes available when playing a DVD disc. You can toggle the OSD mode setting by pressing the DISPLAY button. 1 Mode 1 - Shows the status of the pressed button and some special messages are displayed. The OSD message displays for three seconds.
BASIC OPERATION Preparation: 1 If a television set is used, turn on its power and set the TV/Video switch to “Video”. 1 If a sound system is used, turn on the amplifier first and make sure its outputs are set properly. p p Start Playback 1 Press the POWER button to turn on the DVD player. 1 Press the OPEN/CLOSE button to open the disc tray. 1 Place a disc onto the tray and make sure that it is 1 i i i p Step playback is available while playing discs other than CD-DA.
ADVANCED OPERATION p p Repeated Playback When the 1/ALL button is pressed, the repeated playback is triggered and the OSD message is changed in cycles of “ 1”, “ ALL”, and “ OFF.” “ 1” 1 Enables the repeated playback of a chapter for a DVD disc. 1 Enables the repeated playback of a track for a CD disc or a VCD disc. “ ALL” 1 Enables the repeated playback of a title for a DVD disc. 1 Enables the repeated playback of a disc for a CD disc or a VCD disc. “ OFF” 1 Resumes normal play.
p Digital Video Markers MARK 1 2 3 + + This DVD player supports 5 digital video markers to bookmark your favorite scenes. Store/Set Markers 1 Press the MARK button during playback and the mark menu will be shown on screen. The “+” indicates an empty bookmark. If a number is displayed in place of the “+”, then there is a marker already stored in that position. PRESS ENTER TO PLAY MARK CLEAR TO ERASE 1 MARK + + + + + 1 To playback marker, press the ENTER button to play from the marker.
"ON.") Use the 5 , 3 , 6 , 4 buttons to control the direction and press the ENTER or PLAY button to select the preferred title or you can directly press the numeric buttons to select the title. i DVD discs are divided into units referred to as titles, and titles are divided into chapters. Menu screens do not belong to any title. A disc which contains a movie may have only one title with many or chapter divisions. Karaoke discs may have many titles, assigning a title to each song on the disc.
p Under the search mode, specific title, chapter, or time can be located for immediate playback. SUBTITLE 01/06:ENGLISH DVD search functions During a DVD playback, pressing the SEARCH button can enable the search function. The OSD will show three search methods: by title number, chapter number, and time location. How do you do? 1 When the TITLE 01/35 button is pressed, the subtitle for playback will change in cycles among the available subtitle numbers and “OFF” status.
VCD/CD Search Functions During a VCD or CD playback, this unit only supports the time search function. 1 Pressing the SEARCH button during play will display the OSD for VCD/CD search. 1 When the time is set, play from this position will start immediately. GO TO __:__ p VCD Playback Control (PBC) This function is only available for Video-CD version 2.0 or higher. The PBC operation may differ by disc, therefore, refer to the instructions for each disc.
CONNECTION METHOD OF MICROPHONE (Wireless Karaoke Model Only) Wired Microphone l Plug the smaller end of wired microphone’s Microphone connector into the socket of MIC. and turn clockwise till tight ,then plug the other end of wired microphone’s connector into MIC. jack of the panel. l Turn the power switch of microphone to WD position. (WD) (WL) Wireless Microphone (OFF) Please put batteries into microphone before using it.
KARAOKE MODE (Karaoke Model Only) p Connecting the Microphones 1 Connect the microphone into the "microphone jack" on the front of the DVD player. 1 Switch on the microphone. i This machine could use two wired microphones simultaneously. i Please unplug the microphones, and shift the microphone's power switch to "OFF" position when they are not in use.
VOCAL Control 1 Using the VOCAL ASSIST key on the remote controller to toggle between: LEFT VOCAL, RIGHT VOCAL, BOTH VOCAL, and NO VOCAL. l LEFT VOCAL: If you keep the singing voice from the left channel, the singing voice from right channel will be worked off.In this situation, you can sing with the voice of singer from the left channel in order to present the karaoke effect of choir.
MP3 p MP3 Format 1 This unit supports 56~320Kbps/44.1KHz MP3 disc that are formatted by ISO9660 CD-ROM mode 1 file type. 1 File name can’t be over eight letters. It doesn’t support a long file name and only display in English. p Operation Method Play l Place MP3 disc into the tray, then press OPEN/CLOSE . It will play the disc automatically. l It will list twelve songs a page on the TV screen.
TROUBLESHOOTING Before requesting service for this unit, please check the following chart for possible causes and remedies. If the remedies indicated in the chart below do not solve the problem, please consult your dealer for instructions. Common Symptom Possible Cause Remedy ü Power cord is not properly connected to the power outlet ü Make sure there is a connection between the power cord and the outlet. ü Disc is not properly placed ü ü Replace the disc properly. Turn the power ON.
SPECIFICATION Power requirement Power consumption Weight Dimensions (W x D x H) Operating temperature range Operating humidity range 100-240 V ~, 50/60 Hz 26 W (approx. 6W at standby mode) 4.2Kg (5.1ch model) 430x310x91 (mm) +5 to 40 °C 5 to 90 % (no condensation) Video system SCART terminal (RGB video) R output level G output level B output level NTSC 525/60 Hz or PAL 625/50 Hz 1 Vp-p (75 Ω) 0.7 Vp-p (75 Ω) 0.7 Vp-p(75 Ω) 1 Vp-p (75 Ω) 0.286 Vp-p (75 Ω) 1 Vp-p (75 Ω) 0.7 Vp-p (75Ω) 0.7 Vp-p (75Ω) 0.
REGION MANAGEMENT INFORMATION This DVD player is designed and manufactured to respond to the Region Management Information recorded on a DVD disc. If the region number described on the DVD disc does not correspond to the region number of this DVD player ( The region number can be found on the rear panel of the DVD player), this DVD player will not play the disc. The OSD message “WRONG REGION” will show on the screen. The illustration below shows the regions and corresponding region numbers.
DESCRIPTION OF SCART TERMINAL (Euro Model Only) Pin No Video RGB-Video S-Video 1 Audio Output ( R ) Audio Output ( R ) Audio Output ( R ) 2 Audio Output ( L ) Audio Output ( L ) Audio Output ( L ) 3 No Connection No Connection No Connection 4 Audio GND Audio GND Audio GND 5 No Connection Blue GND No Connection 6 No Connection No Connection No Connection 7 No Connection Blue No Connection 8 Switching Voltage Switching Voltage Switching Voltage 9 No Connection Green GND
