Installation Guide

1
SAMSGAZEBOS
○
R
Designer Corbels
Installation Guide
Introducon
Thank you for purchasing SamsGazebos
○
R
products. These instrucons include helpful hints and informaon
necessary to safely install and properly maintain your
corbels for many years of enjoyment. Please read
instrucons completely before you begin. These
corbles have been designed for easy installaon with
nominal effort. If you have any quesons, please
contact SamsGazebos : [e-mail]
or [phone].
How to Install your corbels
1. Place a corbel at a desired posion.
2. Mark minimum two pilot holes with pencil or
pen.
3. Drill smaller pilot holes than your screws.
4. Fasten it with screws. (Alternavely, fasten it with nails .)
5. Finish to your liking.
Tools Required
◊ Cordless screw driver
◊ Drill bit
◊ Screws
◊ Tape Measure
◊ Pencil or pen
◊ Safety Goggles