User's Manual

Personal fit
1. The CS10 comes
with three different
sized ear tips: small
(pre-attached to
earpiece nozzle), medium, and large. If the small tip is
not snug in your ear, detach the ear tip from the nozzle
and try the medium or large tip.
2. Align the nub on the ear tip with the mark on the
earpiece. Proper alignment is necessary to provide the
most secure mounting of the ear tip.
3. Slide the ear tip all the way onto the earpiece nozzle.
The end of the sleeve should come into contact with
the base of the nozzle.
4. The battery wire can be adjusted to maximize the
comfort of your CS10. Grasping the body of the
earpiece in one hand, gently pull or push the battery
wire with your other hand to achieve the desired
length. Be careful not to pull too hard as you could
dislodge the tube and break the wire connections.
USING YOUR CS10
Attach a battery to the CS10
1. Align the contacts and magnets of a charged battery
with the battery terminals and magnets on the earpiece.
2. Once the battery snaps into place, the unit is on. It is
normal to have a slight delay of a few seconds as the
unit powers up. To turn the unit off, simply disconnect
the battery.
3. The CS10 provides an audible low battery indication.
When you hear five tones played in sequence
(low, high, low, high, low) it is time to change batteries.
8 9