User Manual

AirLine ATX Wireless System 15
ENGLISHFRANÇAISDEUTSCHEESPAÑOLITALIANO
The CR99 receiver can be installed into a standard 19” rack for transport or permanent
installation using the included rack ears. Follow the simple steps below to mount the
CR99:
Rack Mounting
Attach the included rack ears by screwing each
rack ear into either side of the CR99.
Position the CR99 receiver into an avail-
able rack space and slide in until the
rack ears are touching the rails of the
rack case and are aligned with the rack
rail holes.
Mount the receiver into the rack using
the appropriate size rack screws (not
included). To ensure equal tension and
balance when installing the receiver,
you should secure screws in a crisscross
pattern of opposite corners: top left ->
bottom right -> top right -> bottom left.
In order to mount two CR99 receivers in one rack
space, the system includes a center connection
piece. Screw the center connection piece into
bottom of each receiver and attach the short rack
ears to each receiver.
Mount the receivers into the rack using
the crisscross pattern described above.