Specifications

6
Introduction
Thank you for purchasing the Samson RESOLV 120a Reference Subwoofer. Taking care of the low
end in any near-field monitor or multi-media system, a powerful 120 watt low frequency amplifier
drives a heavy-duty 10" transducer, reproducing tones between 40 –180 Hz. The RESOLV 120a has
a built-in active crossover with a phase switch, an auto sleep mode, and a convenient mute switch
jack allowing the user to easily switch on and off the subwoofer on the fly. The RESOLV 120a’s low
frequency driver is a 10”, 25mm excursion transducer with a Butyl surround providing extended
range and tight low frequency response. The RESOLV 120a is a perfect add-on to your Resolv 65,
Resolv 65a, for your Samson DMS80 monitor system, or for any near field monitor system where
extended low end is desired.
In these pages, you’ll find a detailed description of the features of the RESOLV 120a subwoofer, as
well as a guided tour through its control panel, step-by-step instructions for its setup and use, and
full specifications. You’ll also find a warranty card enclosed—please don’t forget to fill it out and
mail it in so that you can receive online technical support and so we can send you updated infor
-
mation about these and other Samson products in the future.
With proper care and adequate air circulation, your RESOLV 120a will operate trouble free for many
years. We recommend you record your serial number in the space provided below for future refer
-
ence.
Serial number:
Date of purchase:
Should your unit ever require servicing, a Return Authorization number (RA) must be obtained
before shipping your unit to Samson. Without this number, the unit will not be accepted. Please
call Samson at 1-800-3SAMSON (1-800-372-6766) for a Return Authorization number prior to ship
-
ping your unit. Please retain the original packing materials and if possible, return the unit in the
original carton and packing materials.
ENGLISH