User Manual

PAGE 2 OF 3
SamsonRope.com | Email [e-mail] | Tel [phone]
16-Strand Class I Eye Splice
SAMSON SPLICING INSTRUCTIONS
5
step
PERFORMING SPLICE
MARKING TAILS
5A
Insert d into rope at Mark B and
out at Mark D.
5b
Pull tail through body of rope from
B to D.
5D
Continue to pull the tail end of the rope
through until Mark A and Mark B coincide.
5c
As each marked strand pair is about to
be buried in the rope at Mark B, carefully
cut each strand in the marked pair.
Mark C
Mark C
Mark D
Mark D
Mark B
Mark B
Mark A
Cut as strand
pairs are
about to
be buried
Emerging
wire fid
6
step
6A
Smooth rope from eye at Mark B, back to
Mark D to remove all slack in the braid.
6b
Smooth rope from knot to Mark C to bury
as much of the core yarns as possible.
6c
Mark both cover tail and core yarns where
they exit from the body of the rope.
Mark C
Mark D
Mark B
Mark tail and
core strands
where they exit
rope
core yarns
tail