2 x15″ Stackable Aluminum Drive Bass Enclosure Hartke
15XL Introduction and Features Congratulations on purchasing the 215XL bass enclosure by Hartke! The XL Series enclosures have been designed to provide excellent tone with a warm punchy output. The 215XL features dual 15-inch, proprietary low frequency driver with an aluminum cone, impregnated fabric surround, and matched convex dust cover all mounted in a heavy-duty steel frame.
Connecting the 215XL About Impedance Before you hook up your speaker cabinet, be sure that you understand a little about impedance. Impedance is the electronic load that the speaker puts on the power amplifier and is measured in Ohms. Here is the tricky, yet simple rule of impedance: When two speakers are wired in "Parallel" the total impedance is cut in half and when two speakers are wire in “Series” the total impedance is the sum of the speakers individual impedance.
Specifications Hartke 215XL Specifications Type Impedance (Ohms) Power Handling Drivers SPL Frequency Response Inputs Weight Dimensions Tuned, Vented Enclosure 4 Ohms Impedance 400 Watts RMS Power Handling 2-Hartke 15XL8 Special Design Aluminum 15", 8 ohm, 200 watt drive unit 101dB 30Hz - 2.5kHz 1/4-inch Phone 105 lbs. (47.63) Height:34" (86.36 cm) Width: 24" (60.96 cm) Depth: 18.5" (46.99 cm) Hartke Hartke 575 Underhill Blvd. P.O.