Specifications

Congratulations on purchasing the Hartke Model 3500/5500 Bass Amplifier!
Although this unit is designed for easy operation, we suggest you first take
some time to go through these pages so you can fully understand how we’ve
implemented a number of unique features.
The Model 5500 provides 500 watts of power to a 4 ohm speaker system or
350 watts to an 8 ohm speaker system. The model 3500 produces 350 watts
to a 4 ohm speaker or 240 watts to a 8 ohm speaker. With that kind of power,
the Model 3500/5500 is EXTREMELY loud and punchy. In addition, the Model
3500/5500 offers a number of additional advanced features, including front-
panel compression and graphic equalizer LED indicators, effects send and
return jacks, an effects send/return balance knob, a direct output with ground
lift and pre or post EQ selection.
The Model 3500/5500 is optimized for use with electric bass instruments,
and the front panel controls in both models are virtually identical. You’ll find
either to be an excellent bass amplifier for live performance use in small and
medium-size venues; in addition, the Model 3500/5500’s advanced pre-amp
features makes it ideal for use in recording environments.
In these pages, you’ll find a detailed description of the many features of the
Model 3500/5500 bass amplifier, as well as a guided tour through their front
and rear panels, step-by-step instructions for setting up and using each prod-
uct, detailed discussions about equalization and compression, and full speci-
fications. You’ll also find a warranty card enclosed—please don’t forget to fill
it out and mail it so that you can receive online technical support and so we
can send you updated information about these and other Hartke and Samson
products in the future.
SPECIAL NOTE: Should your unit ever require servicing, a Return
Authorization number (RA) is necessary. Without this number, the unit will
not be accepted. Please call Samson Technologies at 1-800-372-6766 for a
Return Authorization number prior to shipping your unit. Please retain the
original packing material and, if possible, return the unit in its original carton
and packing materials.
Introduction
ENGLISH
2