D" MULTI-PATTERN USB CONDENSER MICROPHONE PROFESSIONAL MICROPHONES C03U
Table of Contents ENGLISH Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 1 C03U Features . . . . . . . . . . . . . . . . . . . . . . . 1 Installing the C03U . . . . . . . . . . . . . . . . . . . . 2 Getting Started with MAC OS X . . . . . . . . . . . . 3 Getting Started with Windows XP . . . . . . . . . . . 4 Using the Softpre Software Applet . . . . . . . . . . 5 Setting a Good Level . . .
Introduction In these pages, you’ll find a detailed description of the features of the C03U Studio Condenser Microphone, as well as step-by-step instructions for its setup and use, and full specifications. You’ll also find a warranty card enclosed—please don’t forget to fill it out and mail it in so that you can receive online technical support and so we can send you updated information about these and other Samson products in the future.
ENGLISH Installing the C03U Installing the C03U is a simple procedure that takes just a few minutes. Since the C03U is USB compliant, you can use either a MAC or PC, connect the included USB cable and plug and play. You will be able to control your C03U using the standard audio interface controls in the MAC or Windows operating system. You will find detailed instructions on setting up with MAC OS and Windows in the following sections of this manual.
Getting Started with MAC OS X The following example is for setting up the C03U in MAC OS X . ENGLISH 1. Plug in microphone. The LED will light to indicate it is receiving USB power. The MAC will recognize the USB audio device and automatically install a universal driver. 2.To select the C03U as the computers audio input, open the System Preferences from the dock or the main Apple Menu (figure 1). Figure 1 3. Next open the Sound preference (figure 2). 4.
ENGLISH Getting Started with Windows XP The following example is for setting up the C03U in Windows XP with Service Pack 2. Other versions may vary slightly. 1. Plug in microphone. The LED will light to indicate it is receiving USB power. Windows will recognize the USB audio device and automatically install the universal drivers (figure 1). (These balloons will not appear next time you plug it in, as the microphone drivers are already installed.
Using the Softpre Software Applet Once you have the C03U software installed you can operate your C03U by following the simple instructions outlined in the following sections of this manual. Setting a Good Level One of the most important fundamentals of good audio engineering is setting proper levels.
ENGLISH Using the Softpre Software Applet DIGITAL VU METER - Input Level To monitor the signal being sent from the C03U, there is an digital VU METER with a scale from infinity to Digtal Mximum or CLIP. The level displayed on the meter will be affected by the Input Gain Fader so be sure that you have that set to the correct position for your sound source. The digital VU METER features “VU” ballistics, which means it reacts to the signal based on an average level.
Operating the C03U 1 Using the PAD Switch ENGLISH The C03U includes a PAD switch, which you can use to lower the input sensitivity of the microphone. When the PAD switch is set at the 0dB position the PAD is bypassed and there is no effect on the signal. When the PAD switch is set to the –10dB position, the microphone’s input sensitivity will be lowered by 10dB. You can use the PAD when you are miking loud sound sources with a high SPL (Sound Pressure Level).
Operating the C03U ENGLISH 3 Super Cardioid While Omni and Bi-directional microphones are very useful for a variety of specialty applications, the majority of miking situations in recording and live sound require uni-directional or Cardioid microphones. The C03U condenser’s pickup pattern is Super-cardioid, which offers even more side-to-side rejection. The uni-directional nature allows for better separation of instruments in the studio and more control over feedback in live sound reinforcement.
Operating the C03U Microphone Placement For most vocal applications you’ll want to position the microphone directly in front of the artist. The same may be true for miking instruments, however, you can make some pretty amazing equalization adjustments by slightly changing the angle of the capsule to the sound source. This can be a very useful technique in capturing the optimum sound of drum set, acoustic guitar, piano or other instruments in a live room or sound stage.
Using the Optional SP01 Shock-Mount ENGLISH Using the Optional SP01 “Spider” Shock-Mount For additional isolation the C03U can be fitted on the optional SP01 “Spider” shock mount. Follow the steps below the to install the SP01. 1 • First, screw the SP01 shock mount onto your mic stand or boom arm. If you’re using a US 5/8” mic stand or boom, remove the Euro adapter. • Remove the C03U swivel mount by rotating the threaded collar counterclockwise as shown in figure 1.
Introduction Merci d’avoir choisi le micro à condensateur de studio Samson C03U. Le C03U est équipé d’une capsule ultra fine de 19 mm, d’un convertisseur Analogique/ Numérique intégré de haute qualité et d’une sortie USB. Le C03U est parfait pour l’enregistrement de la musique ou de toute source audio acoustique avec votre application d’enregistrement sur ordinateur. Il vous suffit de connecter le cordon USB fourni et de lancer l’application pour commencer à enregistrer.
Installation du C03U FRANÇAIS L’installation du C03U est très simple et ne prend que quelques minutes. Le C03U est compatible USB et vous pouvez l’utiliser directement sur un MAC ou sur un PC, en connectant simplement le câble USB fourni. Vous pouvez contrôler le C03U avec les réglages audio de vos systèmes d’exploitation MAC ou Windows. Vous trouverez des instructions détaillées sur la configuration avec MAC OS et Windows dans les sections suivantes de ce mode d’emploi.
Mise en oeuvre sous MAC OS X Cet exemple vous indique comment installer le C03U avec MAC OS X. 1. Connectez le micro. La Led doit s’allumer pour indiquer qu’il reçoit l’alimentation USB. Le MAC reconnaît le périphérique audio USB et installe automatiquement un pilote universel. Figure 1 3. Ouvrez ensuite les préférences Son (Figure 2). 4. Cliquez maintenant sur l’onglet d’Entrée et sélectionnez le C03U (Figure 3). Figure 2 SAMSON C03U Figure 3 13 FRANÇAIS 2.
Mise en oeuvre avec Windows XP Cet exemple vous indique comment installer le C03U avec Windows XP et le Service Pack 2. Les autres versions peuvent varier. FRANÇAIS 1. Connectez le micro. La Led doit s’allumer pour indiquer qu’il reçoit l’alimentation USB. Windows reconnaît le périphérique audio USB et installe automatiquement le Driver (Figure 1). (Les bulles d’aide contextuelle ne s’affichent que lors de la première installation).
Utilisation du logiciel Softpre Installation du logiciel Softpre Vous pouvez utiliser le C03U avec la plupart des logiciels audio en connectant simplement le micro au port USB de l’ordinateur. Ceci dit, pour tirer avantage des fonctions avancées, installez le logiciel du Samson C03U. Il est facile de télécharger ce logiciel : saisissez l’adresse samsontech.com dans votre navigateur Internet, recherchez le lien vers le Driver du C03U et suivez les instructions à l’écran pour le télécharger.
FRANÇAIS Utilisation du logiciel Softpre AFFICHEUR DE NIVEAU - Niveau d’entrée Pour visualiser le niveau du signal transmis par le C03U, vous disposez d’un afficheur de niveau avec une plage allant de l’infini à l’écrêtage (CLIP). Le niveau affiché est affecté par le Fader de gain — réglez le gain avec précision en fonction de la source enregistrée. L’afficheur de niveau indique le niveau moyen du signal. Utilisez-le lorsque vous déterminez le niveau d’entrée avec le Fader de gain.
Utilisation du C03U 1 Utilisation du sélecteur PAD Le C03U est pourvu d’un sélecteur PAD permettant d’atténuer la sensibilité en entrée du micro. Lorsque ce sélecteur est placé sur la position 0 dB, le circuit d’atténuation est désactivé et le niveau du signal n’est pas affecté. Lorsqu’il est placé sur la position -10 dB, la sensibilité en entrée est atténuée de 10 dB. Placez-le sur cette position lorsque vous utilisez le micro avec des sources produisant des niveaux sonores extrêmement élevés.
Utilisation du C03U FRANÇAIS 3 Micro hyper-cardioïde Les micros omni-directionnels et bi-directionnels s’avèrent très pratiques pour bon nombre d’applications. Les situations de prises de son les plus courantes (scène et enregistrement) nécessitent néanmoins l’utilisation d’un micro uni-directionnel (ou cardioïde). Le micro à condensateur C03U est de type hyper-cardioïde, afin d'offrir une réjection maximale des sons latéraux.
Utilisation du C03U Positionnement du micro Le positionnement du C03U par rapport à l’instrument ou au chanteur que vous enregistrez influence directement la qualité sonore finale. Tous les micros, et en particulier les micros uni-directionnels ou cardioïdes, sont très sensibles à un phénomène connu sous le nom “d’effet de proximité”.
Suspension anti-choc SP01 optionnelle Utilisation de la suspension anti-choc SP01 “Spider” optionnelle FRANÇAIS Afin de garantir une isolation optimale du micro, le C03U peut être installé sur la suspension anti-choc SP01 “Spider” optionnelle. Cette procédure vous indique comment installer le micro sur sa suspension SP01 : 1 • Tout d’abord, vissez la suspension SP01 sur le pied ou sur la perche micro. Si vous utilisez un pied à la norme américaine 5/8”, retirez l’adaptateur à la norme européenne.
Einleitung Herzlichen Glückwunsch zum Kauf des Samson C03U Studio-Kondensatormikrofons. Das C03U zeichnet sich aus durch eine große, 19 mm, ultra-dünne Membrankapsel mit integriertem, hochwertigem Analog/Digital-Konverter und USB-Ausgang. Das C03U eignet sich perfekt zum Aufnehmen von Musik oder jeder anderen akustischen Audioquelle mit Ihrer Lieblings-DAW (Digital Audio Workstation). Einfach das mitgelieferte USB-Kabel einstecken, die DAW starten und mit der Aufnahme beginnen.
C03U installieren Das C03U lässt sich in wenigen Minuten problemlos installieren. Da das C03U dem USBStandard entspricht, können Sie es über das mitgelieferte USB-Kabel an einen MAC oder PC anschließen und – wie bei Plug&Play üblich – sofort anfangen. Sie können Ihr C03U mit den standard Audio Interface-Reglern des MAC- oder Windows-Betriebssystems steuern. Detaillierte Anleitungen zum Einrichten des Geräts mit MAC OS und Windows finden Sie in den folgenden Abschnitten dieses Handbuchs.
Erste Schritte mit MAC OS X Das folgende Beispiel beschreibt das Einrichten des C03U in MAC OS X . 1. Schließen Sie das Mikrofon an. Die LED leuchtet und das Mikrofon empfängt USBSpannung. Der MAC erkennt das USB Audio gerät und installiert automatisch einen Universaltreiber. 2. Um das C03U als Audio-Eingang des Com puters zu wählen, öffnen Sie die Systemsteuerung (System Preferences) aus dem Dock oder dem Apple-Hauptmenü (Abb. 1). Abb. 1 3. Öffnen Sie dann die Sound-Einstellungen (Abb. 2). 4.
Erste Schritte mit Windows XP Das folgende Beispiel beschreibt das Einrich ten des C03U in Windows XP mit Service Pack 2. Andere Versionen können geringfügig variieren. 1. Schließen Sie das Mikrofon an. Die LED leuchtet und das Mikrofon empfängt USBSpannung. Windows erkennt das USB Audiogerät und installiert automatisch die Universaltreiber (Abb. 1). (Diese Sprechblasen werden beim nächsten Anschließen des Mikrofons nicht mehr erscheinen, da die Mikrofontreiber bereits installiert sind.) Abb.
Softpre Software Applet verwenden Softpre Software installieren Das C03U arbeitet mit den meisten Audio-Programmen zusammen, nachdem Sie das Mikrofon einfach über das mitgelieferte USB-Kabel an Ihren Computer angeschlossen haben. Um allerdings die komplexeren Funktionen zu nutzen, müssen Sie die Samson C03U Software installieren. Diese ist sehr einfach erhältlich. Geben Sie „www. samsontech.
Softpre Software Applet verwenden DIGITALE VU-ANZEIGE - Eingangspegel Zum Überwachen des vom C03U übertragenen Signals gibt es eine digitale VU-ANZEIGE mit einer Skala von „unendlich“ bis „Digtal Mximum“ oder CLIP. Der auf der Anzeige dargestellte Pegel wird vom Input Gain Fader beeinflusst, daher sollte dieser auf die für die Klangquelle geeignete Position eingestellt sein. Die digitale VU-ANZEIGE simuliert eine “VU” Ballistik und reagiert auf durchschnittliche Signalpegel.
C03U betreiben 1 PAD-Schalter einsetzen Das C03U verfügt über einen PAD-Schalter, mit dem sich die Eingangsempfindlichkeit des Mikrofons verringern lässt. In der 0 dB-Stellung des PAD-Schalters wird die Bedämpfung (PAD) umgangen und das Signal bleibt unbeeinflusst. In der –10dB-Stellung des PAD-Schalters wird die Eingangsempfindlichkeit des Mikrofons um 10 dB verringert. Setzen Sie das PAD ein, wenn Sie laute Klangquellen mit hohem Schalldruckpegel (SPL) via Mikrofon aufnehmen.
C03U betreiben 3 Superniere Während Mikrofone mit Omni- und bidirektionaler Charakteristik für die verschiedensten Spezialanwendungen sehr nützlich sind, erfordert die Mehrzahl von Mikrofonabnahmen bei Aufnahmen und Live-Beschallungen entweder unidirektionale oder Nieren-Mikrofone. Die Supernieren-Charakteristik des C03U Kondensatormikrofons bietet eine stärkere Unter drückung von seitlich auftreffendem Schall.
C03U betreiben Mikrofon-Platzierung Um die Klangqualität zu maximieren, müssen Sie genau darauf achten, wie Ihr C03U platziert und bezüglich des abzunehmenden Instruments oder Sängers aufgestellt ist. Alle Mikrofone und besonders unidirektionale oder Nierenmikrofone zeichnen sich durch ein Phänomen namens „Nahbesprechungseffekt“ aus. Dieser entsteht durch die Änderung des Frequenzgangs eines Mikrofons, der wiederum auf der Entfernung (und Position) zwischen Mikrofonkapsel und Klangquelle basiert.
Optionale SP01 Stoßschutz-Halterung montieren Optionale SP01 “Spider” Stoßschutz-Halterung verwenden Zur zusätzlichen Isolation kann das C03U auf die optionale SP01 “Spider” StoßschutzHalterung montiert werden. Gehen Sie wie folgt vor, um die SP01 zu installieren. 1 • Schrauben Sie die SP01 StoßschutzHalterung zuerst auf Ihren Mikrofon ständer oder Galgenständerarm. Bei einem amerikanischen 5/8” Mikrofonoder Galgenständer müssen Sie den Euro-Adapter entfernen.
Introducción Felicidades y gracias por su compra del micro condensador de estudio Samson C03U. El C03U dispone de un gran y super fino diafragma de 19 mm con un convertidor analógico-digital de alta calidad y una salida USB exteriores. Este micrófono es perfecto para la grabación de su música, o de cualquier fuente audio acústico a su DAW (workstation audio digital) preferido. Simplemente conecte el cable USB incluido, arranque su DAW e inicie la grabación.
Instalación del C03U La instalación del C03U es un proceso muy sencillo que solo requerirá unos minutos. Dado que el C03U es un dispositivo USB, puede usarlo tanto en un MAC como en un PC, a los que tras conectarles el cable USB cable ya podrá funcionar. Podrá controlar su C03U usando los controles del interface audio standard del sistema operativo MAC o Windows. En las siguientes secciones de este manual encontrará instrucciones concretas acerca de cómo configurar este aparato con MAC OS y Windows.
Puesta en marcha con MAC OS X A continuación le mostraremos un ejemplo de la configuración del C03U en MAC OS X . 1. Conecte el micrófono. El piloto se iluminará para indicarle que está recibiendo corriente a través de la conexión USB. El MAC reconocerá el dispositivo audio USB e instalará de forma automática un controlador universal. 2. Para elegir el C03U como la entrada audio del ordenador, abra las preferencias del sistema en el dock o en el menú Apple principal (figura 1). Figura 1 3.
Puesta en marcha con Windows XP En el ejemplo siguiente puede ver la configuración del C03U en Windows XP con el Service Pack 2. En el caso de otras versiones, el proceso puede variar ligeramente. Figura 1 1. Conecte el micrófono. El piloto se iluminará para indicarle que el micro está recibiendo corriente a través de la conexión USB. Windows reconocerá el dispositivo de audio USB e instalará de forma automática los controladores universales (figura 1).
Uso del programa Softpre Software Applet Instalación del programa Softpre El C03U puede funcionar con la mayoría de programas audio, simplemente conectando el micrófono a su ordenador por medio del cable USB incluido. No obstante, para sacar el máximo partido de las funciones avanzadas debería instalar el programa Samson C03U. El conseguir este programa es muy sencillo. Simplemente teclee samsontech.
Uso del programa Softpre Software Applet ESPAÑOL MEDIDOR DIGITAL VU - Nivel de entrada Para monitorizar la señal enviada desde el C03U, dispone de un MEDIDOR digital VU con una escala que va desde infinito al máximo digital o CLIP. El nivel que aparezca en el medidor se verá afectado por el fader de ganancia de entrada, por lo que asegúrese de ajustar la posición correcta para su fuente de sonido.
Manejo del C03U 1 Uso del interruptor PAD El C03U incluye un interruptor PAD que puede usar para reducir la sensibilidad de entrada del micro. Cuando ajuste este interruptor a la posición 0dB quedará anulado y no habrá efecto sobre la señal. Cuando lo ajuste a -10dB, la sensibilidad de entrada del micrófono será reducida en 10 dB. Puede usar este interruptor PAD cuando esté captando fuentes de señal potentes con un SPL (nivel de presión sonora) alto.
Manejo del C03U 3 Supercardioide Mientras que los micros omni y bidireccionales son muy útiles para una amplia gama de aplicaciones concretas, la mayor parte de las situaciones de microfonía en estudios y directo requieren micros cardioides o unidireccionales. Uno de los patrones de captura del C03U es supercardioide, lo que le ofrece incluso un rechazo a los lados aun mayor.
Manejo del C03U Colocación del micrófono De cara a maximizar la calidad del sonido debe poner una especial atención en la ubicación de su C03U y en su colocación con respecto al instrumento o cantante que quiera captar.
Uso de la protección opcional SP01 Uso de la protección opcional "en araña" SP01 Para un mayor aislamiento, puede colocar el C03U en la protección opcional "en araña" SP01. Realice los pasos siguientes para instalar el SP01. 1 • Primero, atornille la protección SP01 en el soporte de micro o jirafa. Si está usando un soporte o jirafa US de 5/8”, retire el adaptador Euro. • Quite la pinza de sujeción del C03U girando hacia la izquierda el anillo de tuerca, tal como le mostramos en la figura 1.
Introduzione Ci congratuliamo con voi per l'acquisto del condensatore da studio C03U Samson. Il C03U dispone di una ampia capsula a diaframma ultra sottile da 19mm con a bordo un convertitore Analogico - Digitale di qualità elevata ed uscita USB. Il C03U è perfetto per la registrazione della vostra musica o di qualsiasi sorgente audio acustica sulla vostra DAW (Digital Audio Workstation) preferita. Vi basta collegare il cavo USB in dotazione, lanciare la DAW ed iniziare a registrare.
L'Installazione del C03U L'installazione del C03U è una procedura semplice che richiede solo pochi minuti. Dato che il C03U rispetta le specifiche USB, potete usare sia un MAC che un PC e collegare il cavo USB in dotazione: si tratta di una operazione “plug and play” (collegalo e usalo). Potrete controllare il vostro C03U dall'interfaccia audio standard dei sistemi operativi MAC OS e Windows.
Come Iniziare con MAC OS X L'esempio che segue spiega la regolazione del C03U in MAC OS X . 1. Collegate il microfono. Vedrete il suo LED illuminarsi, ad indicare che riceve l'alimentazione USB. Il MAC riconoscerà l'apparecchio audio USB ed installerà automaticamente il software di controllo (“driver”) universale. 2. Per scegliere il C03U come ingresso audio del computer, aprite le Preferenze di Sistema dal dock o dal Menu Apple principale (figura 1). Figura 1 3.
Come Iniziare con Windows XP L'esempio che segue spiega la regolazione del C03U in Windows XP con Service Pack 2. Altre versioni possono presentare leggere variazioni. 1. Collegate il microfono. Vedrete il suo LED illuminarsi, ad indicare che riceve l'alimentazione USB.
L'Uso del Software Applet Softpre Come Installare il Software Softpre Il C03U è subito in grado di lavorare con la maggior parte del software audio, basta semplicemente collegarlo al computer tramite il cavo USB in dotazione. Però, per poter trarre vantaggio dalle sue funzioni avanzate, è necessario installare il software C03U Samson. Ottenere il software è facile. Per scaricarlo vi basta digitare samsontech.
L'Uso del Software Applet Softpre VU METER DIGITALE - Il Livello in Ingresso Per monitorare il segnale inviato dal C03U è presente un VU METER digitale con una scala che va da meno infinito al Massimo Livello Digitale, ovvero al CLIP. Sul livello riportato in misura interviene il Fader di Guadagno in Ingresso, per cui fate in modo di averlo regolato correttamente rispetto alla sorgente sonora.
L'Uso del C03U 1 L'Uso dell'Interruttore PAD Il C03U dispone di un interruttore PAD che permette di abbassarne la sensibilità in ingresso. Quando l'interruttore PAD è regolato nella posizione a 0dB, il circuito di attenuazione è escluso e non c'è nessun intervento sul segnale. Quando l'interruttore PAD è regolato nella posizione a -10dB la sensibilità in ingresso del microfono viene abbassata di 10 dB. Il PAD va usato per la ripresa di sorgenti sonore ad alto volume con elevato SPL (Sound Pressure Level).
L'Uso del C03U 3 Super Cardioide Mentre i microfoni Omni e Bi-direzionali sono molto utili per un gran numero di differenti applicazioni, per la maggior parte delle situazioni di ripresa in registrazione e dal vivo sono necessari microfoni Uni-direzionali o Cardioidi. La risposta polare del C03U è Super Cardioide, ovvero Uni-direzionale, e questo permette una maggiore reiezione dai lati del microfono.
L'Uso del C03U Il Posizionamento del Microfono Per ottenere la massima qualità sonora dovete riporre la massima attenzione nel posizionamento del C03U rispetto allo strumento o alla voce da riprendere. Tutti i microfoni, specialmente i microfoni unidirezionali o cardioidi, esibiscono un fenomeno conosciuto come “effetto di prossimità”.
L'Uso dell'Anti-Shock Opzionale SP01 L'Uso dell'Anti-Shock Opzionale “a Ragnatela” SP01 Per un ulteriore isolamento, il C03U può essere installato nell'anti-shock opzionale “a ragnatela” SP01. Ecco di seguito le istruzioni per l'installazione dell'SP01. 1 • Prima di tutto, avvitate l'anti-shock SP01 su un'asta diritta o a braccio. Se usate un'asta di tipo americano da 5/8”, togliete l'adattatore Europeo.
C03U Specifications 51
Specifications / Caractéristiques techniques / Technische Daten C03U Specifications Frequency Response Polar pattern Element type Diaphragm thickness Sensitivity SPL Weight Dimensions 20~18000 HZ Super Cardioid, Omni, Bi-directional Back condenser type 3 microns -33 dB/Pa 136 dB 1.06 lbs. (.48 kg) Height: 7" (180 mm) Width: 2.125" (54 mm) Depth: 2.125" (54 mm) 2.5 lbs.(1.15 Kg) Shipping Weight Specifications subject to change without notice.
Especificaciones técnicas /Specifiche C03U - Specifiche Risposta in Frequenza Risposta Polare Tipo di Elemento Spessore del Diaframma Sensibilità SPL Peso Dimensioni da 20 a 18000 HZ Super Cardioide, Omni, Bi-direzionale Condensatore a piastra posteriore 3 micron -33 dB/Pa 136 dB 0,48 kg. (1,06 lbs. ) Altezza: 7" (180 mm) Larghezza: 2,125" (54 mm) Profondità: 2,125" (54 mm) 1,15 Kg. (2,5 lbs.) Peso con Imballo Specifiche soggette a variazione senza preavviso.
Samson Technologies Corp. 45 Gilpin Avenue Hauppauge, New York 11788-8816 Phone: 1-800-3-SAMSON (1-800-372-6766) Fax: 631-784-2201 www.samsontech.