User Manual

ENGLISH

ESPAÑOLITALIANO FRANÇAISDEUTSCHE

The SR466 receiver can be installed into a standard 19” for transport or permanent installation

using the included rack ears. Follow the simple steps below to rack mount the SR466:

Attached the included RK466 rack ears, by sliding

each rack ear into the groove on either side of the

SR466 until the rack ear locks into place, and is ush

with the front panel.

Position the SR466 receiver into an available rack space and slide in until the rack ears are touch-

ing the rails of the rack case and are aligned with the rack rail holes.

Mount the receiver into the rack, using

the appropriate size rack screws (not

included). To ensure equal tension and

balance when installing the receiver,

you should secure screws in a crisscross

pattern of opposite corners: top left ->

bottom right -> top right -> bottom left.

Rack Mount Installation

Stage v466: Quad Vocal Wireless System