User Manual

ENGLISH

ESPAÑOLITALIANO FRANÇAISDEUTSCHE

1. Power Switch -Press to turn the receiver on or o.

2. Power Indicator -Lights red when the receiver is powered on.

3. Volume Controls (Channels 1-4) -Rotate to adjust the individual audio output level from

each channel’s receiver.

4. RF Indicators (Channels 1-4) -Lights green when the corresponding HT6 microphone trans-

mitter is powered on, and there is a wireless signal present and detected by the receiver.

5. Antenna -The antenna mountings allow full rotation for optimum placement. In normal

operation, both antennas should be placed in a vertical position. The antennas can be folded

inward for convenience when transporting the SR466.

SR466 Receiver Controls and Features

2 1

7 6 998

6. DC Input -Connect the supplied 12-volt, 500 mA power adapter here.

WARNING: The substitution of any other kind of power adapter can cause severe damage to

the SR466 and will void your warranty.

7. Channels 1 & 2 Outputs -Use these unbalanced ¼” jacks to connect the SR466 Channel 1

and Channel 2 receivers to the line level input of a mixer, amplifier, or other audio equip-

ment. For individual outputs, plug into both jacks, for a mixed signal of both Channel 1 and

Channel 2 receivers, only plug into one of the outputs.

8. Channels 3 & 4 Outputs -Use these unbalanced ¼” jacks to connect the SR466 Channel 3

and Channel 4 receivers to the line level input of a mixer, amplifier, or other audio equip-

ment. For individual outputs, plug into both jacks, for a mixed signal of both Channel 3 and

Channel 4 receivers, only plug into one of the outputs.

9. Mixed Output -This balanced XLR jack is the mixed output of all four receivers to connect

to a line level input of a mixer, amplifier, or other audio equipment. This output can be used

when no additional individual mixing or EQ is necessary per channel.

10. Adaptor Strain Relief -Loop the included adaptor’s cord through the

strain relief to prevent the plug from accidentally detaching from the

receiver.

Stage v466: Quad Vocal Wireless System