Operation Manual

79
Samson AirLine
Appendix B: Attaching the Lanyard to the AL1
3. Place the lanyard over the head of the person using the transmitter,
adjusting the length with the lanyard length adjustment clasp, which
should be at the back of the person’s neck (refer to the illustration
above). Insert the lanyard clip into the AL1 tie clasp until it snaps.
4. The AL1 should rest approximately in the middle of the chest of the
person speaking (see illustration above). To increase signal to the mic,
adjust the AL1 closer to the person’s mouth using the lanyard length
adjustment clasp. To temporarily remove the lanyard from the AL1,
squeeze the clasp and release the clip.
Lanyard
Clip
Lanyard Length Adjustment Clasp
Press button to adjust