Operation Manual

Auro D412/D415
14
Using a Stereo Line Level Signal
Be sure that the Auro D412/D415 Power switch is set to the o position.
Turn the LEVEL control fully counterclockwise to the o position.
Connect the power cable to an AC socket.
Using standard XLR or 1/4” cables, connect the line level signals from a mixer or keyboard into the
Auro Inputs.
Switch the Power switch to the ON position.
Now, run an audio signal from your mixer (like music from a CD) while slowly raising the Auros
Level control until you have reached the desired level.
Connecting a Stereo Signal Source