Product manual

Series B900-N and B900SW-N Manifold Mounted Electric Guns
7
E 2006 Nordson Corporation
Part 1041221B
Table 1 General Safety Warnings and Cautions
Equipment
Type
Warnings and Cautions
HM
WARNING: Hazardous vapors! Before processing any
polyurethane reactive (PUR) hot melt or solvent-based
material through a compatible Nordson melter, read and
comply with the material’s MSDS. Ensure that the material’s
processing temperature and flashpoints will not be exceeded
and that all requirements for safe handling, ventilation, first aid,
and personal protective equipment are met. Failure to comply
with MSDS requirements can cause personal injury, including
death.
HM
WARNING: Reactive material! Never clean any aluminum
component or flush Nordson equipment with halogenated
hydrocarbon fluids. Nordson melters and guns contain
aluminum components that may react violently with
halogenated hydrocarbons. The use of halogenated
hydrocarbon compounds in Nordson equipment can cause
personal injury, including death.
HM, CA
WARNING: System pressurized! Relieve system hydraulic
pressure before breaking any hydraulic connection or seal.
Failure to relieve the system hydraulic pressure can result in
the uncontrolled release of hot melt or cold adhesive, causing
personal injury.
HM
WARNING: Molten material! Wear eye or face protection,
clothing that protects exposed skin, and heat-protective gloves
when servicing equipment that contains molten hot melt. Even
when solidified, hot melt can still cause burns. Failure to wear
appropriate personal protective equipment can result in
personal injury.
HM, PC
WARNING: Equipment starts automatically! Remote triggering
devices are used to control automatic hot melt guns. Before
working on or near an operating gun, disable the gun’s
triggering device and remove the air supply to the gun’s
solenoid valve(s). Failure to disable the gun’s triggering device
and remove the supply of air to the solenoid valve(s) can
result in personal injury.
Continued...