Product manual

Series B900-N and B900SW-N Manifold Mounted Electric Guns

E 2006 Nordson Corporation

Part 1041221B

Equipment

Type

Warnings and Cautions

CAUTION: Hot surfaces! Avoid contact with the hot metal

surfaces of guns, hoses, and certain components of the

melter. If contact can not be avoided, wear heat-protective

gloves and clothing when working around heated equipment.

Failure to avoid contact with hot metal surfaces can result in

personal injury.

CAUTION: Some Nordson melters are specifically designed to

process polyurethane reactive (PUR) hot melt. Attempting to

process PUR in equipment not specifically designed for this

purpose can damage the equipment and cause premature

reaction of the hot melt. If you are unsure of the equipment’s

ability to process PUR, contact your Nordson representative

for assistance.

HM, CA

CAUTION: Before using any cleaning or flushing compound

on or in the equipment, read and comply with the

manufacturer’s instructions and the MSDS supplied with the

compound. Some cleaning compounds can react

unpredictably with hot melt or cold adhesive, resulting in

damage to the equipment.

CAUTION: Nordson hot melt equipment is factory tested with

Nordson Type R fluid that contains polyester adipate

plasticizer. Certain hot melt materials can react with Type R

fluid and form a solid gum that can clog the equipment. Before

using the equipment, confirm that the hot melt is compatible

with Type R fluid.

Other Safety Precautions

S Do not use an open flame to heat hot melt system components.

S Check high pressure hoses daily for signs of excessive wear, damage, or leaks.

S Never point a dispensing handgun at yourself or others.

S Suspend dispensing handguns by their proper suspension point.