Product manual

Series B900-N and B900SW-N Manifold Mounted Electric Guns
11
E 2006 Nordson Corporation
Part 1041221B
Table 2 Safety Labels and Tags
Item Part Description
1. N/A WARNING: Hot Surface! Before touching the gun
body, allow the gun to cool, or wear heat−protective
gloves. Failure to allow the gun body to cool or to wear
heat−protective gloves may cause personal injury.
2. 600137 WARNING: Disconnect power and remove system
pressure before disassembly or maintenance. Failure to
follow these instructions may result in serious personal
injury.
3. 243352 WARNING: Fire, injury, or equipment damage can
result if cleanout materials do not meet the following
requirements:
a. Minimum flashpoint to be 550_F (288_C).
b. Liquid and vapor to be non-toxic at use temperature in
equipment.
c. Chemical reactions with adhesive and equipment
materials must not be violently heat producing.
d. Cleanout material must not corrode or otherwise
weaken equipment materials.
4. 600103 CAUTION: This gun is RTD (resistance temperature
detector) controlled. Prior to operation and before
changing adhesive, consult instruction manual for
changing operating temperature. Failure to follow
instructions may result in personal injury or property
damage.
5. 243352 CAUTION: This equipment is factory tested with
Nordson type R fluid containing Polyester Adipate
plasticizer. Certain adhesives may react
with the type R fluid residue to form solid gum, which
can be difficult to remove.To avoid equipment damage,
check with adhesive supplier regarding compatibility
and cleanout procedure before putting adhesive into the
system.