Product manual

Series B900-N and B900SW-N Manifold Mounted Electric Guns

E 2006 Nordson Corporation

Part 1041221B

Installation

Connect Footswitch and Gun Cordset

1. See Figure 3. Connect the handgun footswitch to the appropriate switch receptacle on

the back of the melter.

P/N 1030542

Figure 3: Connect the Gun and Accessories

2. See Figure 3. Connect the fluid inlet gun directly to the manifold. Connect the cordset

to the melter. Up to two guns may be used with the melter. Operating parameter 12 or

13 on the DuraBlue melter must be enabled to use this gun. Refer to Table 3 for the

procedure.

NOTE: Connect the gun to Port 1 or Port 2 only. Operating parameters 12 and 13 do

not affect Port 3 or Port 4.