Product manual

Series B900-N and B900SW-N Manifold Mounted Electric Guns
17
E 2006 Nordson Corporation
Part 1041221B
See Figure 5.
1
2
Figure 5: Module stroke adjustment
1. Guide tube 2. Retaining nut
1. Loosen the retaining nut (2) on top of the module.
2. Use a screwdriver to turn the guide tube (1) clockwise until the armature needle stops
against the seat.
3. Turn the guide tube one-half turn counterclockwise to adjust the stroke to 0.38 mm
(0.015 in.).
4. While holding the guide tube stationary, tighten the retaining nut. Do not overtighten.
Maintenance
WARNING: Allow only personnel with appropriate training and
experience to operate or service the equipment. The use of
untrained or inexperienced personnel to operate or service the
equipment can result in injury, including death, to themselves and
others, and damage to the equipment.
Use these procedures to properly maintain the gun. Attempting any other maintenance
procedures can result in improper system operation, equipment damage, or personal
injury.