Product manual

Series B900-N and B900SW-N Manifold Mounted Electric Guns

E 2006 Nordson Corporation

Part 1041221B

Figure

8: Module replacement

1. Coil pin seal

2. Coil pins

3. Ground pin

4. Module screw

5. O-ring

6. Nozzle

4. Grasp the module at the top and bottom and carefully pull the module away from the

gun to disconnect the coil pins (2) and ground pin (3). If the module resists, lightly tap

the coil until the module breaks free.

CAUTION: Do not rotate module. Damage to pins may result.

5. Wipe off dripping adhesive from the manifold face. Do not allow the adhesive to drip

into the electrical connector.