Product manual

Series B900-N and B900SW-N Manifold Mounted Electric Guns

E 2006 Nordson Corporation

Part 1041221B

6. Remove the connector mounting screws and then remove the connector.

7. If necessary, cut the connector wires back to the insulation and re-strip them to 4 mm

(0.19 in.).

8. Insert the connector wires into the screw-clamp sockets and tighten the screws.

9. Press the connector into the slot in the manifold and reinstall the mounting screws.

Figure

11: Coil connector replacement

1. Socket screw

2. Coil connector

3. Mounting screw

4. Wires

Note:

10. Check the screw-clamp terminations and tighten as necessary.

11. Reinstall the gasket and manifold cover plate.