Control Valves and Components for Process, Wellhead and Safety Shutdown Systems BULLETIN B316 2012 ® ISO 9001 CERTIFIED www.versa-valves.com e-mail: sales@versa-valves.com Versa Products Company, Inc., 22 Spring Valley Road, Paramus, New Jersey 07601 ● TEL: 201/843-2400 Fax: 201/843-2931 Versa BV.
QUALITY IS ABSOLUTE Quality has no degrees at Versa. There is no such thing as “pretty good” or “almost right”. Every product is designed and manufactured to conform to uniformly high standards. These standards are assured by a quality management system which includes ISO 9001 certification and testing of all products prior to shipment. No matter how tough the application or environmental demands, Versa offers you a choice of valves to meet the challenge.
Versa exercises diligence to assure that information contained in this catalog is correct, but does not accept responsibility for any errors or omissions. Versa also reserves the right to change or delete data or products at any time without prior notification. To be sure the data you require is correct, consult factory. This Catalog SERIES Covers...
SERIES B316 VALVES STAINLESS STEEL CONSTRUCTION 3-WAY VALVES Construction Pressure and Media Versa B316 Valves are spool poppet valves except for double pilot and double solenoid valves which have balanced spools. Standard size O ring seals, placed in accordance with Versa’s Anti-Extrusion principle provides long trouble free service with little and easy maintenance. - 0 to 200 psig (14 bar); Air or Hydrocarbon gases or other gases compatible with materials used.
Manually Operates Valves button flush with the button guard to protect against accidental actuation. Nominal operating force is 3.75 lbs. + .05 times line pressure (or 3.25N x bar line pressure + 17N). For palm, finger, knee or straight-line mechanical operation. Can also be cam actuated if cam rise is gradual. Unguarded type has button exposed above valve body approximately 1/8”, which is distance required for full actuation.
SERIES B316 VALVES STAINLESS STEEL CONSTRUCTION Pilot Operated Valves Pilot medium can be other than medium being controlled. Controlled by a pressure signal applied to a small integral pilot piston that actuates the valve. 3/2-(Three-Way) Valves DIMENSIONS: Inch mm Pilot Operated/Spring Return .13 3.3 .50 12.7 1.0 25.4 3.31 84.0 1.25 SQ 31.7 .27 6.9 Ø N. O. BSP-3306-316 N. C. BSP-3303-316 (closed crossover) BSP-3308-316 ⅛” NPT PILOT PORT .34 8.6 1.0 25.4 ¼” NPT 3 PORTS 1.66 42.
Mechanically Operated Valves 3/2-(Three-Way) Valves Can be operated by a cam or machine member from any angle, but pressure angle should not exceed 15° from vertical center line. .13 3.3 .50 12.7 1.0 25.4 3.31 84.0 .27 6.9 Ø 0.15 max stroke 4.1 Cam Operated/ Spring Return 0.18 4.6 A 0.13 min stroke 3.5 N. O. BSC-3306-316 IN EX .34 8.6 1.0 25.4 1.66 42.1 ¼” NPT 3 PORTS A 1.25 31.7 sq. N. C.
SERIES B316 VALVES STAINLESS STEEL CONSTRUCTION Solenoid/Pilot Operates Valves- 3/2-(Three-Way) Valves Solenoid-Pilot actuated Series B316 valves are available with a variety of different solenoids for both nonhazardous and hazardous locations. Basic details of actuators are listed below. For additional data consult factory.
PRODUCT NUMBER COIL CODES: Complete product numbers require, when applicable, a coil code that represents the desired coil current type, frequency and voltage. The coil code takes the form shown below, with ratings and voltage substituted as required. Rating Code A = 60Hz frequency D = Direct Current (DC) E = 50Hz frequency Voltage (Indicated by three digits: as example, 24 volts = 024 120 volts = 120.
SERIES B316 VALVES STAINLESS STEEL CONSTRUCTION Solenoid/Pilot Operated Valves A low power solenoid controls a built-in pilot which provides the positive force for shifting the valve spool. When used with a spring return the valve will be actuated when the solenoid is energized and will return when the solenoid is de-energized. When used in pairs for 2-position valves, the solenoid need only be engergized momentarily in order to shift the valve.
DIMENSIONS: Inch mm Solenoid-Pilot Operated/ Solenoid-Pilot Return; (detented) 8.33 211.6 3.38 85.9 2.48 63 4.05 111.6 A IN EX 24 Lead 610 Length INPilot type EXPilot type ⅛” NPT Expilot port 1.2 30.5 2.77 6.53 BGG-3308-316-(*) BGG-3328-316-(*) (*) Specify Options (below) & coil code (page 9).
SERIES B316 VALVES STAINLESS STEEL CONSTRUCTION Valves For Hazardous Locations - 3/2-(Three-Way) Valves HAZARDOUS LOCATIONS Valves with -XX or -LB-XX type solenoids are UL listed and CSA approved. (d) FLAMEPROOF Valves with -XN or -LB-XN type solenoids are ATEX certified. See page 8/9 for additional solenoid details. DIMENSIONS: Inch mm Solenoid-Pilot Operated/ Spring Return 1.52 38.6 5.47 139 2.0 50.8 .13 3.3 .50 12.7 Manual Override (Option) 1.0 25.4 Electrical Conduit Hub ½” NPT A N. O.
Valves For Hazardous Locations - 3/2-(Three-Way) Valves (d) FLAMEPROOF (e) INCREASED SAFETY Valves with -XDBS or -XDBT type solenoids are ATEX IEC CSA INMETRO certified. See page 8/9 for additional solenoid details. DIMENSIONS: Inch mm Solenoid-Pilot Operated/Spring Return N. O. ⅛” NPT OR ¼” NPT SOLENOID ADAPTER OPTIONAL (SUFFIX -H2 OR -H) CAN BE ROTATED THROUGH 360° .75 19.1 ø 1.5 38.1 EXTERNAL GROUND CONNECTION 4.68 118.9 ¼” NPT (3 PORT) 3.47 88.1 .63 15.
SERIES B316 VALVES STAINLESS STEEL CONSTRUCTION Valves For Hazardous Locations - 3/2-(Three-Way) Valves HAZARDOUS LOCATIONS DIMENSIONS: Inch mm Valves with -HC-XISC or HCC-XISC are CSA and Factory Mutual approved. (ia) INTRINSIC SAFE Valves with -HC-XISX6 or HCC-XISX6 are ATEX certified. See page 8/9 for additional solenoid details.
MANUAL SHUT-OFF VALVES STAINLESS STEEL CONSTRUCTION General Description Designed for use in emergency shut down systems, Manual Shut-Off valves are available in two types. The Two-Way (2/2) valve is designated as a Block & Bleed valve. When the panel knob is pulled out, supply pressure is dumped to atmosphere. The Three-Way (3/2) valve is designated as a Charge & Bleed valve. In the normal operating mode of this valve the inlet port is connected to the outlet port and the exhaust port is blocked.
Series B900 VALVES STAINLESS STEEL CONSTRUCTION Main Supply Reset Valves General Description Air Latch Pilot - when pressurized will not actuate the valve until knob is pulled out. Pressure in the pilot chamber can then hold the valve in the actuated position, and will unlatch the knob actuator if the latching feature is included.
Main Supply Reset Valves - 3/2 (Three Way) Normally Closed Type: Air Pilot* These valves can be actuated (open to flow) by a pilot signal or manually by pulling the knob when there is no pilot signal. When the pilot signal is removed or drops below 7 psi (0.5 bar), or the knob is released when there is no pilot pressure, the valve will spring return to close the flow. manual pin latch, pull the knob or apply a pilot signal.
Series B900 VALVES STAINLESS STEEL CONSTRUCTION Main Supply Reset Valves - 3/2 (Three-Way) Normally Closed Type: Air Latch Pilot* knob is pulled out and released. To release the manual latch, pull the knob or apply a pilot signal. Pressure applied to the pilot latch port will not cause the pilot chamber to be pressurized until the knob is manually pulled out. Pilot pressure will then hold the valve open to flow against the spring. If the pilot pressure drops below 7 psi (0.
Main Supply Reset Valves - 3/2 (Three-Way) Normally Closed Type: Specialized Application DIMENSIONS: Inch mm Description Function is the same as Air Latch Pilot types on page 18 except that internal connection from CYL port to pilot provides the valve with a means to trip the valve closed to flow should a leak or other loss of pressure occur in the indicator loop line that connects “Indicator valves” to the pilot port.
Series B900 & B550 VALVES STAINLESS STEEL HARDCOATED ALUMINUM CONSTRUCTION Indicating Relay – Pilot Monitoring Valves Indicating Relay valves are used to monitor the pilot actuators of the Main Supply Relay valves listed on pages 16-19. The Indicating Relays have two functions.
FIRST OUT INDICATOR/INDICATING RELAY-RECEIVING TYPE CYL PILOT EXH DIRECTION OF ACTUATION (INDICATOR) GREEN RED Dimensions are approximate. Consult factory for actual dimensions of specific valves. .77 19.6 .77 19.6 Ø 1.0 MIN PANEL HOLE 25.4 Ø .27 (3 MOUNTING HOLES) 6.9 .50 12.7 IN EX 1.28 SQ 7.17 182.1 .66 16.8 2.9 53.1 2.36 60 1.89 48 4.47 113.5 .54 13.7 1.0 25.4 IN ⅛” NPT PILOT EXHAUST PORT 2.22 56.4 .56 14.2 MAX PANEL THICKNESS PILOT 1.33 33.8 1.05 26.7 1.70 43.
Series B900 & B550 VALVES STAINLESS STEEL CONSTRUCTION HARDCOATED ALUMINUM Indicating Relay – Pilot Monitoring Valves FIRST OUT INDICATOR/INDICATING RELAY-RECEIVING TYPE WITH INTEGRAL BYPASS The First Out Indicator with an integral bypass combines the functions of two valves into one. Its primary function is that of the First Out Indicator/Indicating Relay-Receiving type (BAA3308-550RA or BAA-3308-900RA) as shown on page 21.
Series B316 B550 B900 VALVES Repair Kits & Information CAUTION: Before attempting to repair any VERSA Valve, always be certain that all pressure in the system including the valve to be repaired, has been turned off and the system and valve has been depressurized before proceeding with the repair. Serious injury or death may occur if this procedure is neglected. VERSA Valves are designed and built to provide millions of trouble free cycles.
WARNINGS REGARDING THE DESIGN APPLICATION, INSTALLATION AND SERVICE OF VERSA PRODUCTS The warnings below must be read and reviewed before designing a system utilizing, installing, servicing, or removing a Versa product. Improper use, installation or servicing of a Versa product could create a hazard to personnel and property. DESIGN APPLICATION WARNINGS Versa products are intended for use where compressed air or industrial hydraulic fluids are present.
