Specifications

The warnings below must be read and reviewed before designing a system utilizing, installing,
servicing, or removing a Versa product. Improper use, installation or servicing of a Versa
product could create a hazard to personnel and property.
DESIGN APPLICATION WARNINGS
Versa products are intended for use where compressed air or industrial hydraulic uids are
present. For use with media other than specied or for non-industrial applications or other
applications not within published specications, consult Versa.
Versa products are not inherently dangerous. They are only a component of a larger system.
The system in which a Versa product is used must include adequate safeguards to prevent
injury or damage in the event of system or product failure, whether this failure be of switches,
regulators, cylinders, valves or any other system component. System designers must provide
adequate warnings for each system in which a Versa product is utilized. These warnings,
including those set forth herein, should be provided by the designer to those who will come in
contact with the system.
Where questions exist regarding the applicability of a Versa product to a given use, inquiries
should be addressed directly to the manufacturer. Conrmation should be obtained directly
from the manufacturer regarding any questioned application prior to proceeding.
INSTALLATION, OPERATION AND SERVICE WARNINGS
Do not install or service any Versa product on a system or machine without rst depressurizing
the system and turning off any air, uid, or electricity to the system or machine. All applicable
electrical, mechanical, and safety codes, as well as applicable governmental regulations and
laws must be complied with when installing or servicing a Versa product.
Versa products should only be installed or serviced by qualied, knowledgeable personnel
who understand how these specic products are to be installed and operated. The individual
must be familiar with the particular specications, including specications for temperature,
pressure, lubrication, environment and ltration for the Versa product which is being installed
or serviced. Specications may be obtained upon request directly from Versa. If damages
should occur to a Versa product, do not operate the system containing the Versa product.
Consult Versa for technical information.
LIMITED WARRANTY DISCLAIMER AND
LIMITATION OF REMEDIES
Products sold by Versa are warranted to be free from defective material and workman-
ship for a period of ten years from the date of manufacture, provided said items are used
in accordance with Versa specications. Versa’s liability pursuant to that warranty is
limited to the replacement of the Versa product proved to be defective provided the alleg-
edly defective product is returned to Versa or its authorized distributor.
Versa provides no other warranties, expressed or implied, except as stated above. There
are no implied warranties of merchantability or tness for a particular purpose. Versa’s
liability for breach of warranty as herein stated is the only and exclusive remedy and in no
event shall Versa be responsible or liable for incidental or consequential damages.
WARNINGS REGARDING THE DESIGN APPLICATION,
INSTALLATION AND SERVICE OF VERSA PRODUCTS
www.versa-valves.com
e-mail: [e-mail]