Owner`s manual

8
The following example is for setting up the
C01U in MAC OS X .
1. Plug in microphone. The LED will light
to indicate it is receiving USB power.
The MAC will recognize the USB audio
device and automatically install a
universal driver.
2. To select the C01U as the comput-
ers audio input, open the System
Preferences from the dock or the main
Apple Menu (figure 1).
3. Next open the Sound preference
(figure 2).
4. Now, click in the Input tab and select
SAMSON C01U (figure 3).
5. To set the gain of the microphone,
adjust the Input volume slider at the
bottom of the Sound dialog box.
At this point you can begin using your
microphone with most any audio re-
cording software, but you need to select
it as an input device within the DAW.
When selecting the input just look for
and select the SAMSON C01U.
Figure 2
Figure 1
Figure 3
Getting Started with MAC OS X