Operation Manual
Table Of Contents
- Introduction
- Controls and Functions
- D1500 Quick Start
- Using the D1500 as an RTA.
- GLOBAL
- Selecting the Input
- Using the Microphone Input
- Operating the D1500
- MIDI and D Net
- Using the D1500 as a Signal Generator
- Using the D1500 as a VU Meter
- Operating the PHASE meter
- Using the D1500’s EQ Display
- FREQ – FREQUENCY
- HOLD
- RES – RESOLUTION
- REF - REFERENCE LEVEL
- WEIGHT
- INTEG – INTEGRATION
- DETECT
- GAIN
- SOURCE
- Adjusting the RTA parameters
- Using the ANALYZE Mode
- Operating the D1500 with the D2500 Digital EQ
- Operating the D1500 with the D2500 Equalizer
- Operating the D1500 with an Analog 31-band Equalizer
- Grounding Techniques
- D1500 Wiring Guide
- Specifications
14
Selecting MIDI Omni mode
You can program the D1500 to receive MIDI mes-
sages in Omni mode by following the next steps.
• Press the MIDI switch until that LCD reads OMNI.
• Use the Data Wheel to select Omni ON.
• Press STORE
Selecting MIDI System Exclusive Mode
You can program the D1500 to receive or transmit
MIDI System Exclusive messages. Program the D1500
for System Exclusive operation by following these
simple steps.
• Press the MIDI switch until that LCD reads Sys Ex.
Off: to access the MIDI System Exclusive menu.
• Now, select one of the transmit and receive modes.
• If you want the D1500 to transmit system exclusive
messages, use the Data Wheel to select SysEx. Tr.
Press STORE
• In order to set the D1500 to receive system exclu-
sive messages, use the Data Wheel to select
SysEx.
Rc.
Press STORE
• If you want the D1500 to receive and transmit sys-
tem exclusive messages, use the Data Wheel to select
SysEx.
T + R.
Press STORE
• Use the Data Wheel to select
SysEx.
OFF and the
D1500 will not transmit or receive any system exclu-
sive messages.
Press STORE
Selecting MIDI Program Change
You can program the D1500 to receive or transmit
MIDI Program messages. Program the D1500 for
MIDI Program Change operation by following these
simple steps.
• Press the MIDI switch until that LCD reads: PgmCh.
to access the MIDI Program Change menu.
• Now, select one of the transmit and receive modes.
• If you want the D1500 to transmit system exclusive
messages, use the Data Wheel to select:
PgmCh.
Tr.
• Press STORE
• In order to set the D1500 to receive system exclu-
sive messages, use the Data Wheel to select:
PgmCh.
Rc.
Press STORE
• If you want the D1500 to receive and transmit MIDI
Program Change, use the Data Wheel to select:
PgmCh.
T + R.
Press STORE
• Use the Data Wheel to select:
PgmCh.
OFF and the
D1500 will not transmit or receive any program
change informtion.
Press STORE
Operating the D1500