Owner's Manual
Table Of Contents
- Owner's Manual
- Important Safety Information
- Introduction
- Features
- XP312w Mixer Callouts
- XP312w Rear Panel Callouts
- CR88a Receiver Display
- Using the CR88a Receiver
- Using the CR88a Receiver
- CH88 Handheld Transmitter Callouts
- Quick Start
- Connecting Samson XPD Wireless
- Using the LINE OUT Jack
- Using a Speaker Stand
- Charging the Battery
- Installing the CR88a Receiver
- Specifications
- Concert 88a Operating Bands and Frequency Ranges
- Product Registration
XP312w • Portable PA System 15
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
The XP312w LINE OUT jack allows you to connect the XP312w with any powered speaker to
expand your system or link two XP312w systems together to daisy chain the speakers.
Using a standard shielded 1/4” instrument cable, connect the LINE OUT on the XP312w to
a line level input of a second powered speaker. The XP312w will send a mix of all inputs,
including Bluetooth® audio. Each channel VOLUME will control corresponding output level
to the LINE OUT jack.
Using the LINE OUT Jack
Using a Speaker Stand
The XP312w includes a 1 3/8” (35mm) pole mount
receptacle on the bottom of the cabinet. This fits
a standard 1-3/8” (35mm) speaker stand. For
maximum coverage when using a speaker stand,
the speaker should be raised above the heads of the
listening audience.
Take care when placing the speaker on a stand,
to ensure that it is on a level, steady surface and
will not tip over. Use a stand designed to support a
speaker with a minimum weight of 40lb.