Specifications

12
Charging the XP40i and XP40iw
The XP40i and XP40iw have an internal
Gel cell battery allowing you to use the
sound system without a power cord for
up to four hours. Your actual battery life
will depend on what your application
is. For example, if you use the XP40i to
play back loud disco music, the battery
life will be less than if you use it for light
speech. To charge the XP40i or XP40iw
battery follow these simple steps:
• CheckthatthePOWERswitchisset
to the “OFF” position. Next, plug the
supplied power adapter into the
rear panel DC inlet and then into an
appropriate power outlet.
• TakenoticeoftherearpanelCHARGE
LED which will illuminate red if the
battery level is not fully charged.
• Leavetheunitoffforupto4hours
until you see the CHARGE LED
change to green indicating the
XP40i or XP40iw battery is fully
charged.
Operating the XP40i and XP40iw
Using the LINK connection
You can expand you sound system a second XP40i or XP40iw using the LINK
connector. Uses a standard shielded instrument cable terminated with two ¼-inch
phone plugs and connect each end to the ¼-inch LINK jacks located on the XP40i
and XP40iw’s rear panels. Following are some examples of connecting multiple
XP40i’s and XP40iw’s.