Specifications

Effect Types and Parameters
ZOOM G1/G1X
22
■MODULATION module
This module comprises effects such as chorus, pitch shifter, delay, etc. For this module, the two
items MODULATION and RATE can be adjusted separately.
MODULATION (Type&Prm1) RATE (Prm2)
Selects the MODULATION module
effect type and controls parameter
1 at the same time.
Controls parameter 2 of the
MODULATION module.
Chorus
Rate
This effect mixes a variable pitch-shifted
component to the original signal, resulting
in full-bodied resonating sound. Higher
right-digit setting values result in higher
effect sound mixing ratio.
Adjusts the modulation rate.
Ensemble
This is a chorus ensemble with three-
dimensional movement. Higher right-digit
setting values result in higher effect sound
mixing ratio.
Flanger
Rate
This effect produces a resonating and
strongly undulating sound. Higher right-
digit setting values emphasize the
characteristics of the effect.
Adjusts the modulation rate.
Step
Special effect that changes the sound in a
staircase pattern. Higher right-digit setting
values emphasize the characteristics of the
effect.
Pitch Shift
Shift
This effect shifts the pitch of the original
sound up or down. Higher right-digit
setting values increase the mixing ratio of
effect sound versus original sound.
Sets the pitch shift amount in semitones.
"dt" results in a detune effect.
Mono Pitch
This is a monophonic pitch shifter (for
single-note playing) with reduced flutter.
Higher right-digit setting values increase
the mixing ratio of effect sound versus
original sound.
HPS (Harmonized Pitch
Shifter)
Key
This is an intelligent pitch shifter that
automatically generates major scale
harmonies according to a preset key.
Higher right-digit setting values increase
the mixing ratio of effect sound versus
original sound.
Specifies the tonic for the scale used for
pitch shifting. The "o" symbol stands for
#.
Vibrato
Rate
This is an effect with automatic vibrato.
Higher right-digit setting values
emphasize the vibrato intensity.
Adjusts the vibrato rate.
C1 C9 150
E1 E9
F1 F9 150
TAP
S1 S9
P1 P9
112
DT
2
4
2 1
M1 M9
H1 H9
CCO
,
DDO
,
E
FFO
,
AAO
,
GGO
,
B
C1 C9
V1 V9
150
TAP
Effect Types and Parameters
ZOOM G1/G1X
23
■DELAY module
Pitch Bend
Pedal Position
This effect allows using the expression
pedal to change the pitch in real time.
Right-digit setting values select the pitch
change type caused by the expression
pedal (see Table 1).
Sets the initial value for the pitch shift
amount (the value that is active when the
pedal is at rest). The original sound/effect
sound level balance also changes
according to the parameter 1 setting.
[Table1]
Delay
Time
This is a delay with a maximum setting of
2000 ms. Higher right-digit setting values
increase the mixing ratio of effect sound
versus original sound and the feedback
amount.
Sets the delay time. In the 10 – 1000
millisecond range, the adjustment is
performed in 10-ms steps (1 – 99, 1.0).
Above 1 second, the adjustment is
performed in 100-ms steps (1.1 – 2.0).
This module comprises various delay effects. For this module, the two items DELAY and TIME can
be adjusted separately.
DELAY (Type&Prm1)
Selects the DELAY module effect type and controls parameter 1 at the same time.
Delay
This is a delay with a maximum setting of 5000 ms. The right-digit setting values control the mixing
ratio of effect sound versus original sound and the feedback amount.
Tape Echo
This effect simulates a tape echo with a long delay time of up to 5000 ms. The right-digit setting values
control the mixing ratio of effect sound versus original sound and the feedback amount.
Analog Delay
This effect simulates an analog delay with a long delay time of up to 5000 ms. The right-digit setting
values control the mixing ratio of effect sound versus original sound and the feedback amount.
Ping Pong Delay
This is a ping-pong type delay where the delay sound alternates between left and right. The right-digit
setting values control the mixing ratio of effect sound versus original sound and the feedback amount.
TIME (Prm2)
Controls parameter 2 of the DELAY module. This parameter is common to all effect
types.
Time
Sets the delay time. In the 10 – 1000 millisecond range, the adjustment is performed in 10-ms steps (1
– 99, 1.0). Above 1 second, the adjustment is performed in 100-ms steps (1.1 – 5.0).
B1 B9 010
b1
b2
b3
b4
b5
0 cent
0 cent
0 cent
0 cent
0 cent
+1 octave
+2 octaves
-100 cent
-2 octaves
-
∞
Pedal fully depressed
(maximum)
Pedal fully raised
(minimum)
Type&Prm1
Prm2=0 Prm2=1.0
Pedal fully depressed
(maximum)
Pedal fully raised
(minimum)
Type&Prm1
Prm2=0 Prm2=1.0
b6
b7
b8
b9
-1 octave + original sound
-700 cent + original sound
Doubling
- ∞ (0Hz) + original sound
+1 octave + original sound
+500 cent + original sound
Detune + original sound
+1 octave + original sound
D1 D9 120
TAP
D1 D9
T1 T9
A1 A9
P1 P9
150
TAP