Quick Start Guide
ATTENTION RISQUE D’ÉLECTROCUTION ! NE PAS OUVRIR ! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
Graphite M32 · USB Keyboard Controller CAUTION • Increase the separation between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FRANÇAIS Reorient or relocate the receiving antenna. I f you want to dispose this product, do not mix it with general household waste.
Important Safety Information 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Graphite M32 · USB Keyboard Controller In these pages, you’ll find a detailed description of the features of the Graphite M32 keyboard controller, as well as a guided tour of its control panel, and instructions for setup and use. You’ll also find a warranty card enclosed. Please don’t forget to fill it out and mail it in so that you can receive online technical support, and so that we can send you updated information about this and other Samson products in the future.
Features The Samson Graphite M32 utilizes state-of-the-art technology and is engineered to the finest detail.
Graphite M32 · USB Keyboard Controller Quick Start ENGLISH Computer Connect the Graphite M32 to your computer or iPad* using the supplied USB cable. The unit will receive power and transmit MIDI data via the USB connection. FRANÇAIS 1. 2. Launch your DAW or virtual instrument software. 3. Set the Graphite M32 as the MIDI Input and MIDI Output device. DEUTSCHE If the Graphite M32 is connected to a non-powered USB hub, it may not receive enough power to turn on.
Front Panel Controls and Functions 1. VOLUME Knob - This knob is preset from the factory to send MIDI volume (CC #7) messages. The VOLUME knob can be assigned to control different MIDI parameters using the computer editor. 2. DATA Slider - This slider is preset from the factory to send MIDI pan (CC #10) messages. The DATA slider can be assigned to control different MIDI parameters using the computer editor. 3.
Graphite M32 · USB Keyboard Controller 9. Function Keys - In PROG mode, the last 11 keys of the keyboard are assigned to numerical digits (0–9), and ENTER. To Send a program change message, press the PROG button, then enter the program number by pressing the numbered keys. When the program number is entered, press the ENTER key to transmit the program number information. The Graphite M32 will exit the program mode, and the Function keys will transmit note information. 10.
Editing Parameters The Graphite M32 features controls which settings can be customized using the Graphite M32 computer editor, which can be found on the Samson website (www.samsontech.com). The following information outlines the available parameters for each control that can be adjusted. Assignable Volume Knob Control Change: Sets the control change number that the knob will transmit. MIDI Channel: Sets the specific MIDI channel that the knob will use to transmit data.
Graphite M32 · USB Keyboard Controller Specifications Keyboard 32-key, semi-weighted, velocity sensitive Controls Volume Knob Data Slider, Octave +/- buttons, Pitch Bend Ribbon Strip, Modulation Ribbon Strip ENGLISH Operation Controls SUSTAIN, CC Mode, PROG Functions Keys 0-9, Enter MIDI MIDI over USB Power USB Bus Power FRANÇAIS Accessories USB Cable Dimensions 17.36” x 4.8” x 1.65” 441 mm x 122 mm x 42 mm ITALIANO ESPAÑOL DEUTSCHE Weight 1.32 lbs .
Gr ATTENTION RISQUE D’ÉLECTROCUTION ! NE PAS OUVRIR ! MISE EN GARDE : POUR DIMINUER LE RISQUE D’ELECTROCUTION, NE PAS RETIRER LE CACHE (OU A L’ARRIERE). CE MATERIEL NE COMPORTE PAS DE PIECES SUSCEPTIBLES D’ETRE REPAREES PAR L’UTILISATEUR. CONFIEZ TOUTES LES INTERVENTIONS D'ENTRETIEN A DES TECHNICIENS DE S.A.V. QUALIFIE.
raphite M32 - Clavier de commande USB ATTENTION ! Les changements ou modifications apportés à la réalisation de cet appareil non expressément validés par le responsable de la conformité risquent d'annuler l'autorisation de l'utilisateur à faire fonctionner les équipements. FRANÇAIS ENGLISH REMARQUE : Cet appareil a été testé et jugé conforme aux limites applicables à un appareil numérique de Classe B aux termes de la section 15 des Règles de la FCC.
Gr Consignes de sécurité importantes 1. Lire la présente notice. 2. Conserver la présente notice. 3. Respecter toutes les mises en garde. 4. Suivre les consignes. 5. Ne pas utiliser cet appareil près de l'eau. 6. Ne nettoyer qu'avec un chiffon sec. 7. Ne pas boucher les ouïes de ventilation. Installer en respectant la notice du fabricant. 8.
raphite M32 - Clavier de commande USB Introduction ENGLISH Vous venez d'acquérir le clavier de commande USB compact Samson Graphite M32. Merci ! Le Graphite M32 vous offre performances et maîtrise de la production pour s'intégrer facilement aux stations de travail de production numérique sous Windows ou Mac.
Gr Fonctionnalités Faisant appel à une technologie dernier cri, le Samson Graphite M32 est conçu jusqu'au moindre détail.
raphite M32 - Clavier de commande USB Prise en mains rapide ENGLISH Computer Reliez le Graphite M32 à votre ordinateur ou à votre iPad* à l'aide du câble USB joint à la livraison. L'appareil recevra l'alimentation électrique et transmettra des données MIDI via le port USB. FRANÇAIS 1. 2. Lancez votre DAW ou votre logiciel d'instruments virtuels. 3. Paramétrez le Graphite M32 comme dispositif d'Entrée MIDI et de Sortie MIDI.
Gr Réglages et fonctions du panneau avant 1. Bouton de VOLUME - Ce bouton est préréglé d'origine pour envoyer des messages de volume MIDI (CC #7). Le bouton de VOLUME peut également être affecté pour régler différents paramètres MIDI à l'aide du logiciel d'édition sur ordinateur. 2. Curseur DATA - Ce curseur est préréglé d'origine pour envoyer des messages MIDI PAN (CC #10). Le curseur DATA peut être programmé pour régler différents paramètres MIDI à l'aide du logiciel d'édition sur ordinateur. 3.
raphite M32 - Clavier de commande USB Réglages et fonctions du panneau avant Réglette MODULATION - Faites glisser votre doigt pour envoyer des messages de modulation. La modulation sert généralement à appliquer un vibrato ou d'autres effets expressifs à un son joué. 9. Touches de fonctions - En mode PROG, programmer les 11 dernières touches du clavier en les affectant à des touches numériques (0 à 9) et à ENTER.
Gr Paramètres d'Edition Les paramètres du Graphite M32 pour les pré-réglages 2-5 peuvent être personnalisés en utilisant le logiciel d'édition Graphite M32, qu'on trouvera sur le site web de Samson (www. samsontech.com). Les informations suivantes définissent les paramètres disponibles. Modification du réglage du Bouton de Volume programmable : Règle le numéro de modification de réglage que le bouton émettra. Voie MIDI : Définit la voie MIDI précise que le bouton utilisera pour transmettre les données.
raphite M32 - Clavier de commande USB Caractéristiques techniques Clavier 32 touches semi-lourdes sensibles à la vitesse ENGLISH Réglages Bouton de Volume, Curseur de Données, boutons Octave +/-, Réglette de Modulation de Hauteur, Réglette de Modulation Réglages des commandes SUSTAIN, Mode CC, PROG MIDI MIDI sur USB Electricité Alimentation par le bus USB FRANÇAIS Touches de fonctions 0-9, Enter Accessoires Câble USB Dimensions 17,36” x 4,8” x 1,65” 441 mm x 122 mm x 42 mm ITALIANO ESPAÑO
Gr ACHTUNG GEFAHR EINES STROMSCHLAGS! NICHT ÖFFNEN! ACHTUNG: UM DAS RISIKO EINES ELEKTRISCHEN SCHLAGS ZU REDUZIEREN ÖFFNEN SIE NICHT DIE HINTERE ABDECKUNG. ES ENTHÄLT KEINE VOM BENUTZER ZU WARTENDEN TEILE. ÜBERGEBEN SIE DAS GERÄT NUR QUALIFIZIERTEM PERSONAL ZUR REPARATUR. Dieser Blitz mit einem Pfeil als Symbol in einem gleichseitigen Dreieck soll den Benutzer auf das Vorhandensein von "gefährlicher Spannung” im Gehäuse des Produkts hinweisen.
raphite M32 · USB Keyboard Controller ACHTUNG Änderungen oder Modifikationen, die nicht ausdrücklich von der Stelle genehmigt wurden, die für die Konformität mit den geltenden Verordnungen verantwortlichen ist, können zum Verlust der Betriebserlaubnis des Geräts führen. FRANÇAIS ENGLISH ANMERKUNG: Dieses Gerät wurde getestet und entsprechend der FCC Regelungen, Teil 15, als mit der Class B Digital Device Grenzen konform eingestuft.
Gr Wichtige Sicherheitsinformationen 1. Lesen Sie diese Anweisungen. 2. Bewahren Sie diese Anweisungen auf. 3. Beachten Sie alle Warnungen. 4. Folgen Sie allen Anweisungen. 5. Benutzen Sie das Gerät nicht in der Nähe von Wasser. 6. Reinigen Sie es nur mit einem trockenen Tuch. 7. Verschließen Sie keine Ventilationsöffnungen. Installieren Sie das Gerät gemäß den Anweisungen des Herstellers. 8.
raphite M32 · USB Keyboard Controller Einführung ENGLISH Vielen Dank, dass Sie sich für den kompakten SAMSON Graphite M32 USB Keyboard Controller entschieden haben! Das Graphite M32 gibt Ihnen die Leistung und Produktionskontrolle, um problemlos in Ihre Windows oder Mac Produktionsworkstation integriert zu werden.
Gr Funktionen Das Samson Graphite M32 nutzt modernste Technologe und ist bis ins kleinste Detail durchdacht.
raphite M32 · USB Keyboard Controller Kurze Betriebsanleitung ENGLISH Computer Schließen Sie das Graphite M32 Keyboard mit dem mitgelieferten USB Kabel an Ihren Computer oder iPad* an. Das Gerät wird über den USB Anschluss mit Strom versorgt und MIDI Daten senden. FRANÇAIS 1. 2. Starten Sie Ihr DAW oder Software für virtuelle Instrumente. 3. Wählen Sie das Graphite M32 als das MIDI Eingang und MIDI Ausgang Gerät.
Gr Bedienelemente und Funktionen am Frontpanel 1. VOLUME Regler - Dieser Regler ist ab Werk eingestellt, um MIDI Volume (CC #7) Meldungen zu verschicken. Der VOLUME Regler kann mit dem Computer Editor konfiguriert werden, um verschiedene MIDI Parameter zu steuern. 2. DATA Regler - Dieser Regler ist ab Werk eingestellt, um MIDI Pan (CC #10) Meldungen zu verschicken. Der DATA Regler kann mit dem Computer Editor konfiguriert werden, um verschiedene MIDI Parameter zu steuern. 3.
raphite M32 · USB Keyboard Controller Bedienelemente und Funktionen am Frontpanel Funktionstasten - Im PROG Modus werden die ersten 11 Tasten des Keyboards Funktionen und Ziffern (0-9) und ENTER zugewiesen. Um eine Program Change Meldung zu senden, betätigen Sie die Taste PROG und geben Sie dann die Programmnummer mit den Zifferntasten ein. Nachdem die Programmnummer eingegeben wurde betätigen Sie die ENTER Taste, um die Programmnummer Informationen zu übertragen.
Gr Ändern von Parametern Das Graphite M32 Keyboard verfügt über Steuerelemente, deren Einstellungen mit dem Graphite M32 Computer Editor geändert werden kann. Sie können ihn von der Samson Website (www. samsontech.com) herunter laden. Die folgenden Informationen beschreiben die verfügbaren Parameter für jedes Element, die angepasst werden können. Belegbarer Volume Regler Control Change: Stellt die Control Change Nummer ein, die der Regler übertragen wird.
raphite M32 · USB Keyboard Controller Spezifikationen Tastatur 32 Tasten, halbgewichtet, anschlagdynamisch Elemente Volume Regler Data Regler, Octave +/- Tasten, Pitch Bend Band , Modulation Band ENGLISH Steuerelemente SUSTAIN, CC Modus, PROG Funktionstasten 0-9, Enter MIDI MIDI über USB Stromversorgung Spannungsversorgung über USB Anschluss FRANÇAIS Zubehör USB Kabel Abmessungen 17.36” x 4.8” x 1.65” 441 mm x 122 mm x 42 mm ITALIANO ESPAÑOL DEUTSCHE Gewicht 1.
Gr ATENCIÓN ¡RIESGO DE DESCARGA ELÉCTRICA! ¡NO ABRIR! PRECAUCIÓN: CON EL FIN DE REDUCIR EL PELIGRO DE SACUDIDA ELÉCTRICA, NO RETIRE LA TAPA (O LA PARTE POSTERIOR). NO HAY PIEZAS CUYA REPARACIÓN PUEDA SER EFECTUADA POR EL USUARIO EN EL INTERIOR DEL APARATO. ENCARGUE LAS REPARACIONES A PERSONAL TÉCNICO DEBIDAMENTE CUALIFICADO.
raphite M32 · Teclado Controlador USB PRECAUCIÓN Los cambios o modificaciones en este dispositivo no aprobados expresamente por la parte responsable del cumplimiento normativo podrían anular la autorización del usuario para utilizar el equipo. FRANÇAIS ENGLISH NOTA: Se ha verificado que este aparato cumple con los límites establecidos para un dispositivo digital de Clase B, de acuerdo a lo establecido en la Sección 15 de las Normas de la FCC.
Gr Información de Seguridad Importante 1. Lea cuidadosamente estas instrucciones. 2. Conserve estas instrucciones para cualquier consulta en el futuro. 3. Siga cuidadosamente todas las advertencias. 4. Observe y siga todas las instrucciones del fabricante. 5. No utilice este aparato cerca del agua. 6. Limpie el aparato solo con un trapo seco. 7. No bloquee las aperturas de ventilación. Instale el aparato de acuerdo con las instrucciones del fabricante. 8.
raphite M32 · Teclado Controlador USB Introducción ENGLISH ¡Felicidades y gracias por su compra del teclado controlador USB compacto Graphite M32 de Samson! El Graphite M32, fácilmente integrable en su estación de trabajo de producción digital Windows o Mac, le ofrece todo el control de su actuación o producción.
Gr Características El Samson Graphite M32 utiliza la tecnología más avanzada y ha sido diseñado con la máxima precisión y cuidado.
raphite M32 · Teclado Controlador USB Inicio Rápido 1. Conecte el Graphite M32 a su ordenador o iPad* utilizando el cable USB incluido. La unidad recibirá alimentación y transmitirá datos MIDI a través de la conexión USB. FRANÇAIS ENGLISH Computer 2. Inicie su software DAW o de instrumentos virtuales. 3. Configure el Graphite M32 como el dispositivo de Entrada MIDI y Salida MIDI.
Gr Controles y Funciones del Panel Frontal 1. Mando de VOLUMEN - Este mando viene preconfigurado en fábrica para enviar mensajes de volumen MIDI (CC #7). El mando de VOLUMEN puede asignarse para el control de diferentes parámetros MIDI utilizando el editor de ordenador. 2. Mando Deslizante de DATOS - Este mando deslizante viene preconfigurado en fábrica para enviar mensajes MIDI de panorama (CC #10).
raphite M32 · Teclado Controlador USB Controles y Funciones del Panel Frontal Teclas de Función - En el Modo PROG, las últimas 11 teclas del teclado se asignan a dígitos numéricos (0–9) y a INTRO. Para enviar un mensaje de cambio de programa, pulse el botón PROG e introduzca el número de programa a continuación pulsando las teclas numeradas. Cuando haya introducido el número de programa, pulse la tecla INTRO para transmitir la información del número de programa.
Gr Edición de Parámetros El Graphite M32 incluye controles cuyos ajustes pueden personalizarse utilizando el editor de ordenador del Graphite M32, que puede encontrarse en la página web de Samson (www. samsontech.com). La siguiente información indica los parámetros disponibles para cada control que pueden ajustarse. Mando de Volumen Asignable Cambio de Control: Ajusta el número de cambio de control que transmitirá el mando.
raphite M32 · Teclado Controlador USB Especificaciones Teclado 32 teclas semi-contrapesadas, sensible a la velocidad ENGLISH Controles Mando de Volumen, Mando Deslizante de Datos, Botones de Octava +/-, Banda Táctil de Inflexión de Tono, Banda Táctil de Modulación Controles de Operación SUSTAIN, Modo CC, PROG MIDI MIDI en USB Alimentación Alimentación por Bus USB FRANÇAIS Teclas de Función 0-9, Intro Accesorios Cable USB Dimensiones 441 mm x 122 mm x 42 mm 17,36” x 4,8” x 1,65” ITALIANO E
Gr ATTENZIONE RISCHIO DI FOLGORAZIONE! NON APRIRE! ATTENZIONE: PER RIDURRE IL RISCHIO DI FOLGORAZIONE NON ASPORTARE IL COPERCHIO (O LA PARTE POSTERIORE). IL DISPOSITIVO NON CONTIENE COMPONENTI RIPARABILI DALL'UTENTE. PER LE RIPARAZIONI RIVOLGERSI A PERSONALE DI ASSISTENZA QUALIFICATO.
raphite M32 · Controller USB a tastiera ATTENZIONE Variazioni o modifiche alla struttura di questo dispositivo non espressamente approvate dal soggetto responsabile per la conformità potrebbero rendere nulla l'autorizzazione all'utilizzo dell'apparecchio da parte dell'utente. FRANÇAIS ENGLISH NOTA: l'apparecchio è stato testato e ritenuto confacente ai limiti applicabili ai dispositivi digitali di Classe B, conformemente alla Parte 15 delle norme FCC.
Gr Informazioni importanti sulla sicurezza 1. Leggere le presenti istruzioni. 2. Conservare le presenti istruzioni. 3. Prestare attenzione a tutte le avvertenze. 4. Osservare tutte le istruzioni. 5. Non utilizzare l'apparecchio vicino all'acqua. 6. Pulire unicamente con un panno asciutto. 7. Non bloccare alcuna delle aperture di ventilazione. Eseguire l'installazione conformemente alle istruzioni della società produttrice. 8.
raphite M32 · Controller USB a tastiera Introduzione FRANÇAIS ENGLISH Grazie per aver acquistato il controller a tastiera USB compatto Graphite M32 di Samson! Il modello Graphite M32 offre all'utente un controllo completo su esecuzioni e produzione e un'agevole integrazione con le workstation per la produzione audio digitale Windows o Mac.
Gr Caratteristiche Il controller Graphite 32 di Samson utilizza tecnologia all'avanguardia e la sua progettazione è curata fin nei minimi dettagli.
raphite M32 · Controller USB a tastiera Operazioni preliminari ENGLISH Computer Collegare il Graphite M32 al proprio computer o iPad* facendo ricorso al cavo USB in dotazione. L'unità sarà alimentata e trasmetterà dati MIDI attraverso la connessione USB. FRANÇAIS 1. Se il Graphite M32 è collegato a un hub USB non alimentato, potrebbe non ricevere sufficiente corrente per accendersi. Si consiglia di collegare il Graphite M32 direttamente al computer o a un hub USB alimentato.
Gr Comandi e funzioni del pannello frontale 1. Manopola di regolazione del VOLUME - La manopola è preregolata in fabbrica in modo da inviare i messaggi MIDI relativi al volume (CC #7). Attraverso l'editor installato sul computer la manopola di regolazione del VOLUME può essere assegnata in modo tale da controllare diversi parametri MIDI. 2. Cursore DATA (DATI) - Questo cursore è preregolato in fabbrica in modo da inviare i messaggi MIDI pan (CC #10).
raphite M32 · Controller USB a tastiera Comandi e funzioni del pannello frontale Controller a nastro della MODULAZIONE (MODULATION) - Far scorrere il dito per inviare messaggi relativi alla modulazione. La modulazione di solito è utilizzata per aggiungere del vibrato o altri effetti espressivi a un suono che viene riprodotto. 9. Tasti funzione - Nella modalità PROG, gli ultimi undici tasti della tastiera sono assegnati a cifre numeriche (0–9), a questi si aggiunge il tasto ENTER (INVIO).
Gr Modifica dei parametri Il controller Graphite M32 dispone di comandi le cui impostazioni possono essere personalizzate con l'editor Graphite M32 che si può reperire sul sito web di Samson (www.samsontech.com) e installare sul proprio computer. Le seguenti informazioni descrivono a grandi linee i parametri di ogni comando su cui è possibile intervenire. Manopola di regolazione del volume assegnabile Control change: imposta il numero del messaggio di control change che la manopola trasmetterà.
raphite M32 · Controller USB a tastiera Specifiche Tastiera 32 tasti, semipesata, sensibile alla velocity ENGLISH Comandi Manopola di regolazione del volume, Cursore dati, Tasti Oct +/-, Controller a nastro pitch bend, Controller a nastro modulazione Comandi delle operazioni SUSTAIN, modalità CC, PROG Tasti funzione 0-9, Enter (Invio) MIDI via USB Alimentazione Alimentazione tramite bus mediante cavo USB FRANÇAIS MIDI Accessori cavo USB Dimensioni 17,36" x 4,8" x 1,65" 441 mm x 122 mm x 42 mm
Samson Technologies 45 Gilpin Avenue Hauppauge, New York 11788-8816 Phone: 1-800-3-SAMSON (1-800-372-6766) Fax: 631-784-2201 www.samsontech.