Datasheet

4-Track Mode
ZOOM H4
56
2.
Move the jog dial up/down to bring
the cursor to the project you want to
load.
3.
To load the folder, press the jog dial.
The selected project is loaded, and the 4-track
mode top screen appears again.
If you press the center of the [MENU] key
instead of the jog dial, the operation is canceled
and unit returns to the previous condition.
Changing a project name
To change the name of a project on the SD card,
proceed as follows.
1.
Refer to steps 1 – 3 of “Basic project
operations” and bring the cursor to
“RENAME”. Then press the jog dial.
A list with the projects whose names can be
changed appears. The list shows the project name
and number.
2.
Move the jog dial up/down to bring
the cursor to the project you want to
rename. Then press the jog dial.
The name of the selected project is shown.
3.
Move the jog dial up/down to bring
the cursor to the project name. Then
press the jog dial.
The cursor disappears and the first character is
underlined. In this condition, you can change the
project name.
For details on how to change the name, see page
47.
For information on available characters, see page
55. (Note that these are slightly different from
the characters available for the file name.)
4.
To accept the new name, move the
jog dial up/down to bring the cursor
to the OK button, and then press the
jog dial.
The unit returns to the condition of step 1, with
the new project name shown in reverse.
If you select the CANCEL button instead of the
OK button, the new name does not become valid,
and the PROJECT menu appears again.
5.
To return to the PROJECT menu,
repeatedly press the center of the
[MENU] key.
Project nameProject number
Project nameProject number
Name of selected project
OK button CANCEL button
H4_E.book 56 ページ ２００６年９月１日 金曜日 午後７時５６分