Datasheet

Effects
ZOOM H4
65
The effect section is activated. (The ON/OFF
button at the bottom of the display now shows
“OFF” because it will turn the effect section off
when clicked.) The currently selected patch
number and patch name are shown in the center
of the display.
4.
Bring the cursor to the patch
number/patch name indication and
press the jog dial.
The patch selection can now be changed.
5.
Move the jog dial up/down to select
the patch, and then press the jog
dial.
The selected patch is changed.
HINT
If the indication “EMPTY” is shown as the patch
name, a blank patch is selected. This will have no
effect on the sound.
6. To return to the 4-track mode top
screen, repeatedly press the center
of the [MENU] key.
Editing a patch
1.
At the 4-track mode top screen,
press the bottom (INPUT MENU) of
the [MENU] key.
The INPUT menu appears.
2.
Bring the cursor to the “EFFECT”
item and press the jog dial.
The EFFECT menu appears. If the effect section
is off (ON/OFF button shows ON), switch it to
on (ON/OFF button shows OFF).
3.
Select the patch to edit.
HINT
If the indication “EMPTY” is shown as the patch
name, a blank patch is selected. In this case, you
can create a patch from scratch.
NOTE
When the effect section is off, the EDIT button is
grayed out and cannot be used.
4. Bring the cursor to the EDIT button
and press the jog dial.
The EFFECT EDIT screen appears. The “PRE
AMP” and “EFX” items stand for the PREAMP
and EFX modules.
HINT
This screen not only shows the module indication,
it also allows adjusting the patch level (overall
volume of the patch) (see step 10), changing the
patch name (
→
p. 68), and saving the patch (
→
p.
67).
Currently selected patch number/patch name
H4_E.book 65 ページ ２００６年９月１日 金曜日 午後７時５６分