Datasheet

ZOOM H4
77
Miscellaneous Settings
This section explains various other settings and functions of the H4.
Metronome setting
The H4 incorporates a metronome function that
is convenient for use during practice or a
recording session. To set up the metronome,
proceed as follows.
1.
At the stereo mode or 4-track mode
top screen, press the center of the
[MENU] key.
The main menu for miscellaneous settings of the
H4 appears.
2.
Move the jog dial up/down to bring
the cursor to “METRONOME”, and
then press the jog dial.
The METRONOME setting screen appears.
Setting items available from this screen are as
follows.
• CLICK
Determines the conditions under which the
metronome click sound is heard. Available
settings are
R
(playback only),
O
(recording
only),
O
/
R
(recording and playback), OFF
(no click sound).
• PRE COUNT
Determines whether pre-count beats are
played before recording. Available settings
are OFF (no pre-count), 1 – 8 (1 – 8 pre-count
beats), and SP (SPECIAL).
When SP (SPECIAL) is selected, the pre-
count pattern is as follows.
• TEMPO
Determines the metronome tempo setting.
The setting range is 40.0 – 250.0 (BPM) in
0.1 steps.
• SOUND
Determines the sound character of the
metronome. Available settings are BELL
(normal metronome sound; combination of
bell and click), CLICK (click sound only),
STICK (stick-hitting sound), COW-B
(cowbell sound), and HI-Q (synthesizer click
sound).
• PATTERN
Determines the metronome beat pattern.
Available settings are 0/4 – 8/4 and 6/8 (0/4
results in unaccentuated sound).
• LEVEL
Determines the metronome volume level. The
setting range is 0 – 15.
3.
Move the jog dial up/down to bring
the cursor to the item to set, and
then press the jog dial.
The setting for the selected item can now be
adjusted.
4.
Move the jog dial up/down to adjust
H4_E.book 77 ページ ２００６年９月１日 金曜日 午後７時５６分