User Manual

Typical Set-up

The diagram on the right shows a

typical set-up for a project record-

ing studio using the S phantom

to connect two condenser micro-

phones to a personal hard disk

recorder that does not provide

phantom power.

Note: You can use either the XLR

or 1/4-inch phone jack output for

Mic 1 as depicted in the illustra-

tion by the dotted line.

For additional functionality, the

S phantom can be used as a one-

to-two mic splitter using the MIc1

XLR and 1/4-inch Outputs.

Operating the S Phantom

Disconnecting the S phantom

Follow the steps below for disconnecting your system.

• Lower the level controls, to the off position, for the input channels that have the S phan-

tom connected.

• Lower your master volume level control.

• Now, power-down the S phantom supply by removing the AC adapter.