Owner`s manual

Owner's Manual 7Stage v166: Handheld Wireless System
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
1. Power Switch - Press to turn the receiver on or o.
2. Power Indicator - Lights red when
the receiver is powered on.
3. Volume Control - Rotate to adjust
the level of the audio signal out-
put from receiver.
4. RF Indicator - Lights green when
the HT6 transmitter is powered on,
and there is an RF signal present
and detected by the receiver.
5. Antenna - The antenna mountings
allow full rotation for optimum
placement. In normal operation,
both antennas should be placed
in a vertical position. The anten-
nas can be folded inward for
convenience when transporting
the SR166.
6. DC Input - Connect the sup-
plied 12-volt, 200 mA power
adapter here.
WARNING: The substitution
of any other kind of power
adapter can cause severe dam-
age to the SR166 and will void
your warranty.
7. Output - Use this unbalanced, ¼” jack to connect the SR166 receiver to the line level input of
a mixer, amplifier, or other audio equipment.
8. Adaptor Strain Relief - Loop the included adaptor’s cord through the
strain relief to prevent the plug from accidentally detaching from the
receiver.
6 87
234
1
5
SR166 Receiver Controls and Features
6 87
234
1
5