Owner's Manual

AirLine AH7 Wireless System 9
ENGLISHFRANÇAISDEUTSCHEESPAÑOLITALIANO
DE10 Headset
Mic Positioning
Fitting the DE10 Headset
Position the DE10 microphone element
about 0.25” –1” behind the corner of your
mouth. Since the DE10 is an omnidirectional
capsule, the end of the microphone does
not need to be facing your mouth. To avoid
breadth noise and p-pops, do not place the
microphone directly in front of your mouth.
If the microphone is too far away from your
mouth you will need to increase the gain and
reduce isolation.
To minimize additional noise, do not locate
the microphone tight against your cheek.
The DE10 headset can be sized by sliding the
ear hooks to fit snug around your head. If the
DE10 is loose and will not stay in place, slide
the ear hook wires back for a tighter fit.
Adjust the microphone position by holding
the left ear hook wire and slide the boom
forward or back. For optimum performance
the microphone should be close to the
skin and towards the corner of the mouth,
approximately a half inch away.
Position the moisture guard ring as close to
the capsule as possible.
For outdoor use and to help reduce p-popping,
use the included windscreens.