Quick Guide

• Do not install the refrigerator in a damp place or place where it may come in contact with water.
- Deteriorated insulation on electrical parts may cause an electric shock or fi re.
• Do not place this refrigerator in direct sunlight or expose it to the heat from stoves, room heaters, or other
appliances.
• Do not plug several appliances into the same multiple power strip. The refrigerator should always be plugged into its
own individual electrical outlet which has a voltage rating that matches the voltage listed on the refrigerator’s rating
plate.
- This provides the best performance and also prevents overloading house wiring circuits, which could cause a fi re
hazard from overheated wires.
• If the wall socket is loose, do not insert the power plug.
- There is a risk of electric shock of fi re.
• Do not use a cord that shows cracks or abrasion damage along its length or at either end.
• Do not bend the power cord excessively or place heavy articles on it.
• Do not twist or tie the power cord.
• Do not hook the power cord over a metal object, place a heavy object on the power cord, insert the power cord
between objects, or push the power cord into the space behind the appliance.
- When moving the refrigerator, be careful not to roll over or damage the power cord
- This may result in an electric shock or fi re.
• Never unplug your refrigerator by pulling on the power cord. Always grip the plug fi rmly and pull straight out from
the outlet.
- Damage to the cord may cause a short-circuit, fi re, and/or electric shock.
• Do not use aerosols near the refrigerator.
- Using aerosols near the refrigerator may cause an explosion or fi re.
• Do not install this appliance near a heater, infl ammable material.
• Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct sunlight and water (rain
drops).
• Do not install this appliance in a location where gas may leak.
- This may result in an electric shock or fi re.
• This refrigerator must be properly located and installed in accordance with the instructions in this manual before you
use it.
• Connect the power plug in the proper position with the cord hanging down.
- If you connect the power plug upside down, the wire can get cut off and cause a fi re or electric shock.
• When moving the refrigerator, be careful not to roll over or damage the power cord.
- This constitutes a fi re hazard.
• Make sure that the power plug is not squashed or damaged by the back of the refrigerator.
• Keep the packing materials out of reach of children.
- There is a risk of death from suffocation if a child puts the packing materials on his or her head.
• The appliance must be positioned so that the plug is accessible after installation.
- Failing to do so may result in an electric shock or fi re due to electric leakage.
• You need to remove all the protective plastic fi lm before you initially plug the product in.
CRITICAL INSTALLATION WARNINGS