Datasheet

ManualsBrandsSAMSUNG ARTIK ManualsDev KitsPCB design board

SAMSUNG ELECTRONICS RESERVES THE RIGHT TO CHANGE PRODUCTS, INFORMATION AND SPECIFICATIONS WITHOUT NOTICE.

Products and specifications discussed herein are for reference purposes only. All information discussed herein is provided on an "AS IS" basis, without warranties of any kind. This

document and all information discussed herein remain the sole and exclusive property of Samsung Electronics. No license of any patent, copyright, mask work, trademark or any other

intellectual property right is granted by one party to the other party under this document, by implication, estoppel or other-wise. Samsung products are not intended for use in life

support, critical care, medical, safety equipment, or similar applications where product failure could result in loss of life or personal or physical harm, or any military or defense

application, or any governmental procurement to which special terms or provisions may apply. For updates or additional information about Samsung products, contact your nearest

Samsung office. All brand names, trademarks and registered trademarks belong to their respective owners.

PRODUCT BRIEF

April, 2016

Samsung’s ARTIK™ 5 Module is a highly-integrated System-

in-Module that utilizes a dual core ARM® Cortex®-A7

processor packaged DRAM and Flash memories, a Secure

Element and a wide range of wireless communication

options such as 802.11a/b/g/n/ac, Bluetooth 4.1, Bluetooth

Low Energy (BLE), and 802.15.4/ZigBee/Thread*

communications all into a 30x25mm footprint. The many

standard digital control interfaces support external sensors

and higher performance peripherals to expand the module

capabilities. With the combination of Wi-Fi and ZigBee, the

ARTIK 5 is the perfect choice for home automation and

home hub devices, while also supporting a rich UI/UX

capability with the camera and display options. The

hardware based Secure Element works with the ARM®

TrustZone® and Trustonic’s Trusted Execution Environment

(TEE) to provide “bank level” security end-to-end.

TOP VIEW

BOTTOM VIEW

ARTIK 5 Module Block Diagram

Processor

CPU

Dual core ARM® Cortex®-

A7@1.0GHz

GPU

Mali™-400MP2 core

Media

Camera I/F

1x 2-Lane MIPI CSI up to

3MP@30fps (Supports YUV

and MJPEG format)

Display

2-Lane MIPI DSI up to qHD

960x540@24bpp

Audio

1-channel PCM and 1-channel

24-bit I

S audio interface

Memory

DRAM

512MB LPDDR3

FLASH

4GB eMMC

Security

Secure Element

Secure point to point

authentication and data

transfer

Trusted Execution Environment

Trustonic TEE (NDA required)

Radio

WLAN

IEEE 802.11a/b/g/n/ac

Bluetooth

BT/BLE

IEEE802.15.4

ZigBee, Thread*

Power Management

PMIC

Provides all power of the

ARTIK 5 module using on

board bucks and LDO’s

Interfaces

Analog and Digital I/O

GPIO, I

C, SPI, UART, SDIO,

USB 2.0, JTAG, Analog Input

*Thread : Under development

ARTIK 5 MODULE

RADIO

MEDIA

SECURITY

PROCESSOR

POWER MGT. MEMORY

INTERFACES

Summary of content (2 pages)

PAGE 1
PRODUCT BRIEF April, 2016 TOP VIEW Samsung’s ARTIK™ 5 Module is a highly-integrated Systemin-Module that utilizes a dual core ARM® Cortex®-A7 processor packaged DRAM and Flash memories, a Secure Element and a wide range of wireless communication options such as 802.11a/b/g/n/ac, Bluetooth 4.1, Bluetooth Low Energy (BLE), and 802.15.4/ZigBee/Thread* communications all into a 30x25mm footprint.
PAGE 2
Samsung Semiconductor, Inc. ARTIK 5 Product Brief PROCESSOR SYSTEM Display/Camera Cortex-A7 Dual LCD DSI up to 960x540@24bpp DMC CPU 0 1.0 GHz 32kB/32kB Processors LPDDR2-S4 533MHz LPDDR3 @ 667MHZ CPU 1 1.0 GHz 32kB/32kB SRAM/NOR/ROM Display/Camera SCU CAMERA CSI up to 3MP@30fps DDR3 DMC 1MB L2 Cache High Speed I/F Secure 256KB SRAM Multi Media Secure 64KB ROM Low Power Multi-Layer AXI/AHB Bus Mali-400MP2 Series USB 2.