Datasheet

ManualsBrandsSAMSUNG ELECTRO-MECHANICS ManualsResistorsCermet resistor 12.7 kΩ SMD 0603 0.1 W 1 % 100 ppm 1 pc(s)

General Features

Applications

Part Numbering

General

RC 1005 J 101 CS

●

Thick Film Chip Resistor ( General )

● CODE DESIGNATION

RC : This code expresses the Resistor that is produced by Samsung Electro-Mechanics CO.,LTD.

Chip resistors, which are available for surface mounting, are general passive

component which is useful for voltage drop, current controlling in circuit and

surface mounting is available.

Samsung electro-mechanics also manufactures a wide range of chip resistors

such as general, precision, trimmable and low ohms and so on.Production is

increasing with demand for small size & light weight of set product. We provide

ultra-small, high-reliability, high-stability resistors. We have obtained ISO-

9002/QS-9000 and ISO-14001 certification.

- Very small, thin, and light weight.

- Both flow and reflow soldering are applicable.

- Owing to the reduced lead inductance, the high frequency characteristic is

excellent.

- Suitable size and packaging for surface mount assembly.

- General purpose.

- Home Appliances.

(DVD, Digital TV, Camcorder, VTR, Digital Camera, Audio, Tuner).

- For Computers & Communication Device.

(Notebook, Memory Module, Mobile, Network Equipment, etc)

Summary of content (19 pages)

PAGE 1
Thick Film Chip Resistor ( General ) Chip resistors, which are available for surface mounting, are general passive component which is useful for voltage drop, current controlling in circuit and surface mounting is available. Samsung electro-mechanics also manufactures a wide range of chip resistors such as general, precision, trimmable and low ohms and so on.Production is increasing with demand for small size & light weight of set product. We provide ultra-small, high-reliability, high-stability resistors.
PAGE 2
DIMENSION ● The dimension is expressed as 4 digits number by SI unit (mm).
Left 2 digits are length of resistor, and the other 2 digits are width. l1 H W l2 L
[ Unit : ㎜ ] 0603 1005 1608 2012 3216 3225 5025 6432 (0201) (0402) (0603) (0805) (1206) (1210) (2010) (2512) 0.60±0.03 1.00±0.05 1.60±0.10 2.00±0.20 3.20±0.20 3.20±0.20 5.00±0.20 6.30±0.20 W 0.20±0.02 0.30±0.03 0.50±0.05 0.80±0.15 1.25±0.15 1.60±0.15 2.55±0.20 2.50±0.20 3.20±0.20 H 0.12±0.
PAGE 3
4 NOMINAL RESISTANCE VALUE ● The Nominal Resistance Value is expressed as 3 or 4 digits based on EIAJ standard.

item Resistance Tolerance Only number Number & alphabet "R" 3 digits mark(E-24) 4 digits mark(E-48) G, J, K, M G First 2 digits : Resistance value First 3 digits : Resistance value Last 1 digit : Exponential number of 10. Last 1 digit : Exponential number of 10. Read alphabet "R" as decimal point. Read alphabet "R" as decimal point.
PAGE 4
CHARACTERISTIC LINE UP ● RESISTANCE RANGE The Resistance Range that we produce depends on the Dimension and the Resistance Tolerance of the resistor.

Dim.
PAGE 5
● RATED POWER The Rated Power is classified by the dimension of the resistor.

Dimension 0603 1005 1608 2012 3216 3225 5025 6432 (0201) (0402) (0603) (0805) (1206) (1210) (2010) (2512) Rated Power 1/20 W (0.05 W) 1/16 W (0.063 W) 1/10 W (0.100 W) 1/8 W (0.125 W) 1/4 W (0.25 W) 1/3 W (0.33 W) 2/3 W (0.67W) 1.0 W Working Volt.(Max.) 25 V 50 V 50 V 150 V 200 V 200 V 200 V 200 V STOL, IOL Volt.(Max.
PAGE 6
RELIABILITY TEST CONDITION Jumper's reliability test data are only applied to General type resistor. ● ELECTRICAL CHARACTERISTIC The electrical characteristic test should satisfy the test method, procedure, and standard. If there is no special comment, Each test performs in standard state. (temperature 20℃, humidity 65%RH, pressure 1023mbar) item Permissible deviation Resistor Test method Jumper 묤 Standard : JIS C 5201-1 4.5 묤 Test voltage :
묤 Applying time : within 5 seconds.
PAGE 7
item Withstanding voltage Insulation resistance Permissible deviation Resistor Test method Jumper 묤 No mechanical damage, short circuit, Same as left or disconnection. 묤 Should have more Same as than 1,000MΩ left 묤 Standard : JIS C 5201-1 4.7 묤 Test voltage : 0603,1005,1608 AC 100V, others AC 500V 묤 Applying time : 60 +10/-0 seconds 묤 Test board : 묤 Standard : JIS C 5201- 4.7 묤 Test voltage : 0603,1005,1608 DC 100V, others DC 500V 묤 Applying time : 60 seconds 묤 Test pressure : 1.0±0.
PAGE 8
item Termination strength Permissible deviation Resistor 묤 No mechanical damage, or sign of 묤 Standard : JIS C 5201-1 4.16 Same as 묤 Test time : applying pressure for 10 seconds left 묤 Test tension : 0603,1005,1608 - 3N (300g묤f) disconnection Others (500g묤f) 묤 Standard : JIS C 5201-1 4.18 1. No mechanical Withstanding soldering heat 50mΩ damage 2. Δ R should be Maximum within ±(1%+0.05Ω) 2. Δ R should be 묤 Test time : 10 ± 1second (both side dipping) 묤 Standard : JIS C 5201-1 4.
PAGE 9
Permissible deviation item Resistor 1. No mechanical Low temperature exposure 50mΩ Maximum 1. No mechanical High exposure damage 2. ΔR should be within ±(3%+0.1Ω) temperature 50mΩ damage 2. ΔR should be Maximum within ±(3%+0.1Ω) 1. No mechanical damage 2. ΔR should be within
Load life Test method Jumper Range( Ω) Δ R MAX 1 ≤ R < 10 ±5 % 10 ≤ R < 1M ±(3% +0 .1Ω) 1M ≤ R < 10M ±5 % Standard : JIS C 5201-1 4.
PAGE 10
▶ Test board ▷ Test board
item Dimension Power 0603 1005 1608 2012 3216 3225 5025 6432 1/20W 1/16W 1/10W 1/8W 1/4W 1/3W 2/3W 1W a 0.3 0.6 1.0 1.2 2.2 2.2 3.6 5.2 b 1.1 1.9 3.0 4.0 5.0 5.0 7.0 8.0 c 0.45 0.7 1.2 1.65 2.0 2.9 3.0 3.5 10 - φ1.0 c Dimension (mm) 3 3.5 f 5.2 4.9 4.5 4.3 3.3 3.3 3.0 2.5 f a b 25 5.5 7.5 5.08 3 Connector 58.5 : COPPER PATTERN : SOLDER - RESISTOR

, are dimensions of test board.
PAGE 11
PACKAGINGTEST CONDITION RELIABILITY ● PACKAGING METHOD Packaging protects the resistor from damage during the shipping or storage. There are two types of packaging method ; one is "Reel" type, and the other is "Bulk" type. ● REEL TYPE PACKAGING SPECIFICATION The packaging specification is based on the EIAJ RC-1009. is tape dimension For 0603 type.
is for pocket sizes, A and B. 4.0±0.1 0.1 1.5±0 1.75±0.1 1.0 3.5±0.05 B 2.0±0.05 0.5 Max A 0.
PAGE 12
is tape dimension For 1608, 2012, 3216, 3225 type.
is for pocket sizes, A and B. 4.0±0.1 0.1 0 1.5± 1.75±0.1 1.0 3.5±0.05 B 2.0±0.05 1.0 Max 4.0±0.1 Top Tape 8.0±0.1 A Chip Resistor 1.0 Max Carrier Tape Bottom Tape is tape dimension For 5025, 6432 type.
is for pocket sizes, A and B. General
Dimension Symbol A B 0603 1005 1608 2012 3216 3225 5025 6432 (0201) (0402) (0603) (0805) (1206) (1210) (2010) (2512) 0.38±0.
PAGE 13
● TAPING METHOD There are empty holes at both start part and end part of carrier tape. Reel Packed Part Empty Part Lead Part Adhesion Tape Empty Portion 10 Pitches or more ** 5,000 Pitches or 20,000 Pitches Empty Portion Lead Part Start End **** Chips *** 10 Pitches 200~250 mm or more Note ① The resistor should move in the pocket freely. ③ There should be no vacant pocket. ④ Peeling strength of the top tape should be within 5gf and 80gf.
PAGE 14
● REEL DIMENSION The Reel dimension is classified by the diameter of Reel.
< Table 6 > [ Unit : mm ] Diameter A B C D C S 7" 178 Φ 70 9.5(13.0) ± 0.1 1.2 ± 0.1 E S 10" 258 Φ 80 9.5 ± 0.1 2.0 ± 0.1 F S, A S 13" 330 Φ 80 9.5(13.0) ± 0.1 2.0 ± 0.1 ● BULK TYPE PACKAGE Bulk cassette specification is based on the EIAJ ET-7201. The standard packaging quantity depends on the dimension.

6.0 ± 0.05 4.4 ± 0.05 3.4 ± 0.
PAGE 15
● LABELING ▶ Reel type Label The reel type label includes following contents as . ① Resistance Value ① ② ② Tolerance, Marking 100 ③ Part Number ④ Quantity ④ ⑤ ⑥ Bar - Code ⑦ Serial Number 007 Q-2 S or P ⑥ ⑧ S : Pb Free J101 P/N : RC1608J101CS QTY : 5000PCS L/N : ROJA50010 ③ ⑤ LOT Number Ohm P : Polymer & Pb Free ⑦ ⑧ SAMSUNG ELECTRO-MECHANICS CO.,LTD. ▶ Bulk type Label The bulk type label includes following contents as .
PAGE 16
● BOX DIMENSION FOR REEL TYPE ① Max 75,000 pcs ( 5 EA × 7" ) ② Max 300,000 pcs ( 20 EA × 7" ) 30±1.0 185±1.0 195±5.0 187±5.0 66±1.0 285±5.0 185±1.0 ( Unit : mm ) ③ Max 900,000 pcs ( 60 EA ×7" ) ( Unit : mm ) ④ Max 800,000 pcs ( 20 EA ×13" ) 370±5.0 348±5.0 336±5.0 410±5.0 339±5.0 ( Unit : mm ) ( Unit : mm ) ● BOX DIMENSION FOR BULK TYPE ① Inner box ( Cassette × 5 EA ) ② Outer box ( Inner box × 20 EA ) 215 41 135 65 116 ( Unit : mm ) 242 ( Unit : mm ) General 215±5.
PAGE 17
APPLICATION MANUAL ● APPLICATIONS Chip resistors are designed for general electronic devices such as home appliances, computer, mobile communications, digital circuit, etc. If you require our products with high reliability-performing at more than 125C or below -55C for medical equipments, aircraft, high speed machines, military usage, and items that can affect human life or if you need to use in specific conditions (corrosive gas atmosphere), please contact us beforehand.
PAGE 18
● MOUNTING Proper nozzle height must be given attention so as not to give excessive pressure on the chip during mounting on the PCB. (Excessive pressure may cause exterior damage, change in resistance, circuit open, etc.) ● SOLDERING Our products have Ag electrodes protected by double layer.
PAGE 19
NOTICE ● RECOMMENDED USAGE OF THE RESISTOR ▶ Flow Soldering After mounting the resistor to PCB with paste, dip the PCB into solder bath. Temp. 260±5℃ Δ T≤150℃ Pre-heating Soldering Cooling 10 sec. Max. Time ▶ Reflow Soldering After printing solder creams on PCB, place the resistor on the solder cream. Chip Resistor Then heat the PCB. Temp. Peak temp. 10 sec. Max.
Who We Are
About Us
Company
Careers
Terms & Privacy
Resources
List of Manufacturers
Support
For the Press
Media assets
FAQ
Get in touch
Blog
Email
DMCA
ManualShelf © 2013-2024