User's Manual

Samsung Electro-Mechanics Co., Ltd. Proprietary REV 0
Samsung Electro-Mechanics Co., Ltd. Proprietary Page 5
Memory: At least 128 MB of RAM
Processor: Pentium II or better
2.2 Installing and Removing
2.2.1 Installing ETS
VIA Telecom delivers the installation program, “ETS.exe” , as part of the software release package. VIA
Telecom strongly recommends installing ETS in the default directory as the installing shell indicated.
The VIA Telecom software releases are typically numbered “rX.Y.Z” where:
X = Major Release Number
Y = Minor Release Number
Z = Patch to Minor Release
The VIA Telecom complete software package contains:
a. The VIA Telecom CP code, which executes on
the ARM7TDMI-S™ processor embedded in the CBP5.X chip.
b. An “.img” Image file, which contains code or code patches that will run on the DSPM and DSPV
embedded Oak processors.
c. The “ETS.exe” and “ETS_Config_x.exe” package, which installs ETS.
Example
Assume that the VIA Telecom software release is: r6.0.6.
1. The ETS installation program would be: <Customer Path>\ PCTools\ ets\ ETS_6.0.6.exe and
ETS_Config_0.14.2_vtui2_5x.
2. Run ETS_6.0.6.exe and ETS_Config_0.14.2_vtui2_5x . For this example, ETS is installed in
"C:\ Program Files\ VIA Telecom\ VTC-ETS\ ", ETS_Config is in “C:\ Program Files\ VIA
Telecom\ ETS_Config\ ".