User's Manual

Samsung Electro-Mechanics Co., Ltd. Proprietary REV 0
Samsung Electro-Mechanics Co., Ltd. Proprietary Page 30
Window Selections Options Definition
Send -- Send to perform the Cal Initialize command.
Tack -- If checked, the window will remain after clicking “Send”. If
not checked, window will close after clicking “Send”.
Calib Mode NVRAM This loads DBM cache of the DB templates onto the SRAM
cache for execution.
Default This loads a default cal file onto flash. Command “CP CAL
Init NVRAM” (under RF) is needed in conjunction after the
Cal Initialize command.
CP PDM Config
RF → CP PDM Config
Window Selections Options Definition
Send -- Send to perform PDM Configuration Control.
Tack -- If checked, the window will remain after clicking “Send”. If not
checked, window will close after clicking “Send”.
Ctrl Mode Automatic Stack values are used – selections in PDM Number and Value
are ignored.
Manual Values selected in Band and Channel are used
Disable
PDM Number Battery Charge Battery Charge PDM value set
Afc Automatic Frequency Control PDM value set
Tx Agc TX AGC PDM value set
Rx Agc RX ACG PDM Value set
Value Hex value in the format of 0x0000
CP PDM Read value
RF → CP PDM Read Value