User Manual

Yellow

sign on the adapter, it shows the installation is not successful. In this case,

select the adapter and click on

Remove

. Restart your computer after uninstalling the

driver to make the changes effective.

(See the Adapter Removal in section 3.9)

7. Of the icons displayed on the right bottom of desktop, click on icon

stated

Wireless Network Connection

When you are using DHCP, just select the AP that you want to connect in the

Connect to Wireless Network

above.

9. To manually set your IP address, WEP and some other configuration, click on

Advanced

of the above picutre

and then click

Configure

Available networks on the

Wireless Networks

Tab . Set the SSID and parameters to be needed to modify and

then clicking on

OK.

The AP that you selected will be displayed on the Preferred

Networks.